vendor recommendation for either hone/inspection of used cylinders or new P's and C's, 2.2 6 cyl Options

[Optimusglen]

Hey all, my case is due to be finished up at Ollies any day now and I'm starting to think about the next steps of the build. I know that maybe I'd have better luck on one of the 911-centric forums but since it's going in my 914 and since I have more experience here with you guys I thought I'd post here instead.

911T engine (911/07), stock rebuild. Not wanting to put junk on the build, but also not up for spending thousands on just the P's and C's.


I have the stock pistons and cylinders that came off my engine, both look good to the naked eye. But I'd like to have them inspected to get a professional opinion on if they can be reused. And if so, a shop that will clean them up (exterior fins are a bit crusty) and do a proper hone.

If that's out of the question, I'm hoping for recommendations on a vendor for new P's and C's (or just C's). I just finished reading a big thread from 2012 on AA Performance (not Automobile Atlanta) and I'm not sure I want to risk it with the cheap Chinese stuff they sell, but if anyone has first hand experience with them recently I'd certainly be up to hearing about it.