 Splitting the Stubborn Case |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bkrantz |
 Jul 3 2020, 09:22 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 7,742 Joined: 3-August 19 From: SW Colorado Member No.: 23,343 Region Association: Rocky Mountains 
 |
I have removed all case fasteners (20 smaller nuts and/or bolts plus 6 large bolts)--and I have checked at least a dozen times--and compared to various guides. At this point only sealant should be holding the case halves together.
But my gentle and careful efforts have not budged things. And even some slightly more aggressive tapping with a hammer and hardwood dowel has not worked. What to try next? Any good methods besides the tool that wedges the oil strainer hole open? |
   |
 
|
Posts in this topic
bkrantz Splitting the Stubborn Case Jul 3 2020, 09:22 PM
bdstone914 Yes on the tool that inserts into the oil pump cav... Jul 3 2020, 10:49 PM IronHillRestorations There's one nut on the lower front of the case... Jul 4 2020, 06:12 AM cuddy_k Try Jake Raby's method...make sure the front m... Jul 4 2020, 06:16 AM
Robarabian Thats how I did it yesterday.. worked like a charm... Jul 4 2020, 10:18 PM Mark Henry Also make sure all the washers are off, they catch... Jul 4 2020, 04:11 PM Jake Raby If its fighting you, either the case is being held... Jul 4 2020, 06:25 PM cuddy_k :agree: 1000%
Hope you're well, Jake! Jul 4 2020, 06:45 PM bkrantz Thanks, everyone. Cuddy (and Jake) are the winner... Jul 4 2020, 06:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd May 2024 - 01:13 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.