 Another way to install torsion bars from a 911, Has anyone converted the 914 control arms ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Miguel K R |
 Feb 20 2021, 11:27 AM
Post
#1
|
|
Newbie  Group: Members Posts: 20 Joined: 12-December 19 From: Portugal (Europe) Member No.: 23,732 Region Association: None  |
I bought a pair of 911 front torsion bars and the adjusters.
I know that most people replace the 914 control arms by a pair from a 911 in order to have the splines required by the 911 bars. As I am in Portugal (Europe) it is a lot more difficult to find used 911 control arms, so I had the idea of converting the 914 arms to the 911 spline pattern. Has anyone done that, and are some photos or advice available ? I have access to a wire EDM machine so it will be easy to obtain two pieces with the 911 splines, to weld to the arms. And does anyone have a drawing of the 911 splines ? |
   |
 
|
Posts in this topic
Miguel K R Another way to install torsion bars from a 911 Feb 20 2021, 11:27 AM
914Sixer Just buy the Dansk early 911 control Arms. Around ... Feb 20 2021, 12:23 PM Mark Henry Never heard of anyone doing that.
IIRC you can get... Feb 20 2021, 12:30 PM
Steve For a street car the 911 “A” arms with stock 1... Feb 21 2021, 11:50 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 09:40 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.