 Part of a inner longitudinal?, Manf or a clean one? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Boothy |
 Apr 14 2021, 08:01 AM
Post
#1
|
|
Member  Group: Members Posts: 88 Joined: 17-January 19 From: Abington, MA Member No.: 22,805 Region Association: North East States  |
Folks!
Happy kinda spring, I have all the lovely sheet metal coming from RD (very excited) but the one piece I'm looking at is the lower inner longitudinal (passenger of course). RD has that part but I really don't want to go that crazy because it's only the lower 50% I need to reinforce (behind and under the heater hose. And cutting a $400 piece in half just doesn't seem right. It's just 3'-4' with a couple of lengthwise bends to go up against the existing longitudinal and a lip to pick up the inner rocker panel. For the sake of speed and cleanliness I'd like to buy one? Any suppliers that I've missed? I may find a local sheet metal shop to bend up some 18 gauge. Brad's kit is going over it all but I want to do it right. Thanks in advance! |
   |
 
|
Posts in this topic
Boothy Part of a inner longitudinal? Apr 14 2021, 08:01 AM
9146C I made a similar repair on mine...electing not to ... Apr 14 2021, 12:13 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 05:39 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.