 Master cylinder leaks externally, Uggh.... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| pek771 |
 Nov 3 2023, 10:21 AM
Post
#1
|
|
Member  Group: Members Posts: 273 Joined: 23-November 05 From: Conover, NC Member No.: 5,175 Region Association: None 
 |
Hi all.
The new master cylinder I put in leaks. I thought it was leaking at the o-ring for the switch, but it is leaking above that boss. I have no idea what is up there. It is not leaking from the filler tube (which is a single tube, EPDM hose and splits into two for the inlets to the master cylinder-special construction for the batteries in the car. The fuel tank is gone, and the entire well is filled with batteries). Consequently. I hate to pull the MC back out. There seems to be some sort of allen screw or something (best I can tell by feel) on top of the MC. Anyone got any ideas? TIA Pat |
   |
 
|
Posts in this topic
pek771 Master cylinder leaks externally Nov 3 2023, 10:21 AM
Geezer914 When you say the area where the fuel tank was is f... Nov 3 2023, 04:14 PM pek771 Yes it is electric. 7 Tesla batteries and hyper9 m... Nov 4 2023, 06:03 AM Mikey914 Do take a close look at the rubber hose area. If i... Nov 4 2023, 09:16 AM pek771 Yup. it is leaking from the hoses where the resoir... Nov 4 2023, 04:06 PM Geezer914 A little off topic, have you weighed the car to se... Nov 4 2023, 06:42 PM
pek771
A little off topic, have you weighed the car to s... Nov 6 2023, 09:07 AM Dave_Darling Make sure you have the washers in the inlet holes ... Nov 6 2023, 12:22 AM 930cabman
Make sure you have the washers in the inlet holes... Nov 6 2023, 07:13 PM mate914
Make sure you have the washers in the inlet holes... Nov 7 2023, 05:32 AM iankarr Also check to see it's not leaking from the we... Nov 6 2023, 11:27 PM Morrie
Also check to see it's not leaking from the w... Nov 7 2023, 06:41 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th May 2024 - 08:52 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.