![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
Kerrys914 |
![]()
Post
#1
|
Dear, the parts I just sold paid for that part ;) ![]() ![]() ![]() Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/type.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/type.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/screwy.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/screwy.gif) It's for an Engine not an ENGGINE (IMG:http://www.914world.com/bbs2/html/emoticons/type.gif)
I need a shorter engine mount stud (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) for my six. Does anyone have a source where I can get one or two studs? Also, I need about 6 weber/PMO carb studs too. I can get these from PMO but the engine mount stud is a PITA to locate. Seems to be a 10mmx? Cheers |
ArtechnikA |
![]()
Post
#2
|
rich herzog ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 7,390 Joined: 4-April 03 From: Salted Roads, PA Member No.: 513 Region Association: None ![]() |
engine mounting stud - 999.061.034.02
Brandywine should have those... 6 carb studs? i have a big bag of studs i got at my local Ace Hardware for extending the upper valve cover studs for spark plug hold-downs. you should have no trouble sourcing standard 8mm studs locally. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 27th April 2025 - 10:47 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |