![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
djm914-6 |
![]()
Post
#21
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
Here's all I could do last night. Added "shocks" to the rear suspension and built up the front bulkhead.
One of the first things I'd add to this if it were mine would be a set of oil filled shocks. These are just springs and bump stops. Shocks would improve the handling greatly. Attached image(s) ![]() |
greg.treadway |
![]()
Post
#22
|
914 Nut ![]() ![]() Group: Members Posts: 282 Joined: 16-December 04 From: Marietta, GA Member No.: 3,295 ![]() |
These are looking great. It already looks better built than my real one! Great job on these!
(IMG:http://www.914world.com/bbs2/html/emoticons/aktion035.gif) |
effutuo101 |
![]()
Post
#23
|
Advanced Member ![]() ![]() ![]() ![]() Group: Members Posts: 2,735 Joined: 10-April 05 From: Lemon Grove Member No.: 3,914 Region Association: Southern California ![]() |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) Very nice! K. gotta have one. (IMG:http://www.914world.com/bbs2/html/emoticons/wub.gif) Where, how much.....
|
Demick |
![]()
Post
#24
|
Ernie made me do it! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,312 Joined: 6-February 03 From: Pleasanton, CA Member No.: 257 ![]() ![]() |
All I need is paint! I just haven't had time - and can't decide on how to paint it. It's going to be painted like one of the famous GT's, I just can't decide which one!
Demick Attached image(s) ![]() |
ClayPerrine |
![]()
Post
#25
|
Life's been good to me so far..... ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,541 Joined: 11-September 03 From: Hurst, TX. Member No.: 1,143 Region Association: NineFourteenerVille ![]() ![]() |
I have not had time to do anything with the 3 that we purchased. I have been working on the real thing.
|
djm914-6 |
![]()
Post
#26
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
I may have been wrong about the plowing problem. On linoleum (sp?) the car will rotate around it's inside tire. Pretty cool. I spent 5 minutes drifting around the kitchen. Now I'm on to paint two more bodies. The red will be a sister car to the white one but the pink one will be a 70's version of the Fast & Furious S2000.
I'll post build pics tomorrow. I needed to make a few mods for the 914 to sit right. |
Scott S |
![]()
Post
#27
|
Small Member ![]() ![]() ![]() Group: Members Posts: 1,697 Joined: 30-April 03 From: Colorado Member No.: 633 ![]() |
DJjm -
I just wanted to pass on a very belated thanks for making these available - I fricken love it! Cant wait to get started on the thing. Never really been an RC guy, but after getting this and checking the other stuff that is available out there, I think I may have found a new hobby. Thanks Again! (IMG:http://www.914world.com/bbs2/html/emoticons/beerchug.gif) Scott S |
djm914-6 |
![]()
Post
#28
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
Scott, I'm happy to do it. If there's one thing I love it's to help people (spend their money). (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
And here's the pics. I'll do my best to add some comentary. front & rear bulkheads plus backbone Attached image(s) ![]() |
djm914-6 |
![]()
Post
#29
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
Not part if the Alfa's directions is the part than lengthens the chassis to fit the Porsche bodies. The part is included though.
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#30
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
completed chassis
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#31
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
where the extra part lives...
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#32
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
mounted body
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#33
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
rear
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#34
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
front
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#35
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
cut the posts. The direction say to add one set of clips below the body, but doing so makes the 914 ride too high. I uses some left over shock tubing cut to size.
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#36
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
front posts
Attached image(s) ![]() |
djm914-6 |
![]()
Post
#37
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
I'm trying to post pics of a red shell I just finished stickering. I may need to wait till Monday so I can do it from work. For some reason, I can't post pictures from home. (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif)
|
djm914-6 |
![]()
Post
#38
|
Happiness is: Getting on the road ![]() ![]() ![]() Group: Members Posts: 1,864 Joined: 6-February 03 From: Burlington MA Member No.: 248 Region Association: None ![]() |
I can't seem to post pics anymore so for those signed up to RCZ, here's the latest bodies.
RC 914s The GTeener car and 914GURL bodies are done. |
Demick |
![]()
Post
#39
|
Ernie made me do it! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,312 Joined: 6-February 03 From: Pleasanton, CA Member No.: 257 ![]() ![]() |
Lookin' good! I'll post the pictures for you since you can't.
Demick Attached image(s) ![]() |
Demick |
![]()
Post
#40
|
Ernie made me do it! ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,312 Joined: 6-February 03 From: Pleasanton, CA Member No.: 257 ![]() ![]() |
asdf
Attached image(s) ![]() |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 17th June 2024 - 01:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |