Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Ride height - uneven, from shock replacement?
Lawrence
post Aug 4 2003, 12:42 PM
Post #1


Senior Member
***

Group: Benefactors
Posts: 1,661
Joined: 5-February 03
Member No.: 244
Region Association: None



My 914/6 was level before I replaced the rear KYBs with Koni Yellow Adjustables.

Now it's not level. In the back, the right side is about 1.5" higher than the left.

I've inspected, and don't see that the springs are messed up - maybe I don't know what to look for. Springs went back into the side that they came out of. Both spring perches are set at the same "notch" on the shock (the middle one). The wheels aren't tilting out like the console is about to collapse.

It doesn't appear to affect ride quality - but I sure look like a dork.

What might the problem be? Never had this problem with shocks before.

-Rusty (IMG:style_emoticons/default/smoke.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
Lawrence914-6   Ride height - uneven   Aug 4 2003, 12:42 PM
Brad Roberts   Did you "zip tie" the top springs to the upper sho...   Aug 4 2003, 12:43 PM
ninefourteener   Maybe just settling?? I know when I bought my tee...   Aug 4 2003, 12:44 PM
!   The springs sit in a groove on the perches. If th...   Aug 4 2003, 12:45 PM
Lawrence914-6   No, I didn't zip tie the springs in. Heck, I ...   Aug 4 2003, 12:46 PM
nebreitling   i assume that you didn't touch the front suspe...   Aug 4 2003, 12:48 PM
Brad Roberts   You have a spring not sitting in one of the perche...   Aug 4 2003, 12:50 PM
Lawrence914-6   The entire front suspension came out, cleaned up, ...   Aug 4 2003, 12:50 PM
!   Swap them....see if that helps.   Aug 4 2003, 12:51 PM
Lawrence914-6   Hey B... Should I drop the bottom perches a bit, ...   Aug 4 2003, 12:52 PM
!   IF you have adjustable perches....it sounds like o...   Aug 4 2003, 12:53 PM
Brad Roberts   I dont like where the cars sit when you install Ko...   Aug 4 2003, 12:53 PM
Brad Roberts   Did you make sure the springs where in the perches...   Aug 4 2003, 12:57 PM
Lawrence914-6   The springs are yellow - didn't see any number...   Aug 4 2003, 12:58 PM
Brad Roberts   Swap them is the easiest... tell us more about th...   Aug 4 2003, 01:01 PM
Lawrence914-6   Yes, I pulled the control arms off the cross bar. ...   Aug 4 2003, 01:04 PM
ChrisReale   <...   Aug 4 2003, 01:19 PM
J P Stein     Aug 4 2003, 01:22 PM
ChrisReale   Yup, what JP said. BTW anyone need a set of 180 p...   Aug 4 2003, 01:25 PM
Lawrence914-6  
QUOTE
  Aug 4 2003, 01:33 PM
nebreitling   <...   Aug 4 2003, 01:42 PM
J P Stein   <...   Aug 4 2003, 01:48 PM
redshift   I have very good results dropping the front somewh...   Aug 4 2003, 01:51 PM
airsix   > 180#s would be a great joke to play on an unsusp...   Aug 4 2003, 03:17 PM
redshift   Yeah, I hope I am not implicated, it wasn't my...   Aug 4 2003, 03:28 PM
Aaron Cox   well this brings up an interssting suspension ques...   Aug 4 2003, 09:13 PM
mskala   Lawrence, Been there, the front most definitely af...   Aug 4 2003, 10:27 PM
ChrisReale   Handle on rails=un-fucking-comfortable on the stre...   Aug 4 2003, 10:29 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 29th April 2024 - 07:28 PM