 Mueller bearing install and 5 lug conversion, The time has come |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Leo Imperial |
 Nov 17 2005, 01:48 PM
Post
#1
|
|
Do you have to use so many cuss words?  Group: Members Posts: 906 Joined: 29-November 04 From: 914 Roadshow - Glen Cove NY Member No.: 3,192 Region Association: None  |
So I won these parts at the WWC05'. I didn't even know at first what they were, but it didn't take long for the flock to move in and start making offers. Well I decided to do some research and I started collecting parts.
The front end has all been removed including the steering assembly. Turbo tierods will be part of the rebuild. The current swaybar is a 22mm adjustable upfront and will remain. I am keeping the stock 18mm torsion bars and a-arms. Everything else is being refreshed or replaced. When the front is done the rear will be converted to 5 lug and a rear swaybar will be installed. Also if they can be obtained a set of Mueller bearings. So here is the first set of pictures and questions fo Mike. Attached image(s) 
|
   |
 
|
Posts in this topic
Leo Imperial Mueller bearing install and 5 lug conversion Nov 17 2005, 01:48 PM
Leo Imperial So here is the test fit in pictures. Nov 17 2005, 01:51 PM Leo Imperial Perfect fit! Nov 17 2005, 01:52 PM Leo Imperial I mean this is a perfect fit. Nov 17 2005, 01:53 PM Leo Imperial Washer Nov 17 2005, 01:54 PM Leo Imperial Roller Nov 17 2005, 01:55 PM Leo Imperial Washer Nov 17 2005, 01:55 PM Leo Imperial The bearing Nov 17 2005, 01:57 PM Leo Imperial O-ring Nov 17 2005, 01:57 PM Leo Imperial And the front mount. Nov 17 2005, 01:58 PM Leo Imperial Now to grease it all and do the actuall install.
A... Nov 17 2005, 02:00 PM Mueller Look'n good...make sure you lube the living da... Nov 17 2005, 02:01 PM Leo Imperial Is this the type of grease you would use or should... Nov 17 2005, 02:03 PM maf914 I'm just a casual observer of the various bear... Nov 17 2005, 02:19 PM Leo Imperial That was what I had read also.
This stuff makes th... Nov 17 2005, 02:25 PM Mueller Nov 17 2005, 02:27 PM airsix Does the sleeve that the large bearing runs on hav... Nov 17 2005, 02:39 PM McMark http://www.914world.com/bbs2/h... Nov 17 2005, 02:39 PM Aaron Cox Nov 17 2005, 02:40 PM Leo Imperial I have alredy done the install with this shit.
Sho... Nov 18 2005, 02:18 AM rdauenhauer Leo, Im sorta at the same point with my install. T... Nov 18 2005, 04:31 PM Mueller as long as the sleeve was not too loose, as in it ... Nov 18 2005, 04:43 PM Leo Imperial I got lazy withposting, so here is an update of pi... Dec 31 2005, 08:25 PM Leo Imperial With correct boots Dec 31 2005, 08:26 PM Leo Imperial Full assembly Dec 31 2005, 08:27 PM Leo Imperial Front completed and the rear now in progress. Dec 31 2005, 08:29 PM
Travis Neff Looking good Leo. The all black cookies and stanc... Dec 31 2005, 09:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:11 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.