Ash tray drink holder?? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Ash tray drink holder?? |
Marv's3.6six |
Feb 10 2006, 03:44 PM
Post
#1
|
Actual member 7" Group: Members Posts: 695 Joined: 22-November 04 From: Huntington Beach, Ca. Member No.: 3,165 Region Association: Southern California |
N E 1 done this? converted their ash tray to a drink holder? pics puhleas (IMG:http://www.914world.com/bbs2/html/emoticons/huh.gif)
|
brant |
Feb 10 2006, 03:47 PM
Post
#2
|
914 Wizard Group: Members Posts: 11,623 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains |
yes...
sorry no pic's I considered making a webbing to hold the drink, and then decided that I only NEEDED it for coffee. So I found a coffe cup with a "step" in it. (smaller bottom that necks out to a wider top) used a dremel to cut a hole that would catch the coffee cup half way, so it wouldn't tip once inserted. sorry no pics. brant |
STL914 |
Feb 10 2006, 04:56 PM
Post
#3
|
Senior Member Group: Members Posts: 1,180 Joined: 22-October 03 From: O'Fallon, MO Member No.: 1,271 Region Association: Upper MidWest |
It's been discussed here about a year and a half ago. Do a search.
|
Toast |
Feb 10 2006, 04:58 PM
Post
#4
|
Not bad for carrying sway bars. Group: Members Posts: 3,377 Joined: 20-January 04 From: Las Vegas Member No.: 1,580 Region Association: Southwest Region |
Too bad their can not be a astray/drink combo for us smoking/beverage types. (IMG:http://www.914world.com/bbs2/html/emoticons/smoke.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/beer3.gif)
|
seanery |
Feb 10 2006, 05:58 PM
Post
#5
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
the smog guys have 'em....search for midwest classic and rummage through the pics...try 2003's pics first, it might have a different name from 2003 like midwest 914 gathering, or some such thing. Barber Dave put it on that year and I took some pics of them (I think) a lot of the SMOG guys have...curvieroadlover definitely does....good luck
|
seanery |
Feb 10 2006, 06:02 PM
Post
#6
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
ok, since I'm such a nice guy....here's curvie's drink holder
The black plastic thingie with a hole cut in it is actually a 3.5" floppy disk (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) (IMG:http://www.914world.com/bbs2/uploads/post-2-1058750988.jpg) (IMG:http://www.914world.com/bbs2/uploads/post-2-1058751672.jpg) (IMG:http://www.914world.com/bbs2/uploads/post-2-1058751733.jpg) |
jim_hoyland |
Feb 10 2006, 09:27 PM
Post
#7
|
Get that VIN ? Group: Members Posts: 9,298 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California |
Nice ! Can you still push the tray back in ?
|
seanery |
Feb 10 2006, 09:29 PM
Post
#8
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
absolutely...I haven't made one myself, but I bought an extra ashtray to do so.
|
jim_hoyland |
Feb 10 2006, 09:42 PM
Post
#9
|
Get that VIN ? Group: Members Posts: 9,298 Joined: 1-May 03 From: Sunset Beach, CA Member No.: 643 Region Association: Southern California |
Is the webbing attached to a bottom holder ?
|
seanery |
Feb 10 2006, 10:03 PM
Post
#10
|
waiting to rebuild whitey! Group: Retired Admin Posts: 15,852 Joined: 7-January 03 From: Indy Member No.: 100 Region Association: None |
Tom's is just two straps of nylon in an X pattern. I think I'll add a 3rd piece in this direction -X- does that make sense?
|
Crazyhippy |
Feb 10 2006, 10:14 PM
Post
#11
|
Insert witty comment here... Group: Members Posts: 1,659 Joined: 28-July 05 From: Home of the Coyotes, AZ Member No.: 4,493 Region Association: None |
I'm voting best use of shoelaces on the 914 club.... (IMG:http://www.914world.com/bbs2/html/emoticons/rocking nana.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/prop.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/dancinnanner.gif)
BJH (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) |
Lo-Fi Version | Time is now: 17th May 2024 - 08:33 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |