Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Where does your temp needle sit?, For '74 and later cars?
Chris H.
post Sep 17 2003, 03:41 PM
Post #1


Senior Member
****

Group: Members
Posts: 4,027
Joined: 2-January 03
From: Chicago 'burbs
Member No.: 73
Region Association: Upper MidWest



Just a quick question... I have a '75 1.8L and recently swapped the incorrect '73 console temp gauge with the correct one which has the much smaller "red zone". It seems like the needle reads much higher than the old one. It's lined up with the "p" stem in TEMP at operating temperature. Not into the red at all, but higher than the last one read. Where does yours sit normally? Guesstimates welcome.

Thanks,

Chris H.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Sep 17 2003, 03:44 PM
Post #2


Resident German
*************************

Group: Admin
Posts: 41,601
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California



you should get the one that has numbers on it.
can't help you here, never had a oil-temp before, and now it's a 911 gauge and i still have to hook it up.

Andy
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chris H.
post Sep 17 2003, 05:26 PM
Post #3


Senior Member
****

Group: Members
Posts: 4,027
Joined: 2-January 03
From: Chicago 'burbs
Member No.: 73
Region Association: Upper MidWest



I agree, the numbered one is a great idea.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nebreitling
post Sep 17 2003, 06:24 PM
Post #4


Member Emeritus
****

Group: Members
Posts: 3,314
Joined: 26-March 03
From: San Francisco
Member No.: 478



last time my car was at HPH, I had them take the oil temperature after they had warmed it up. they were able to tell me that when the needle pointed over the "E" (of "TEMP), the oil was 200; at "M", it was 210. obviously, this technique isn't the most ideal, but it gives me a baseline to work from.

my 75 2.0 use to run up towards the red (probably around 225 or 230) and would overheat if i let it. removed the rain tray, helped a little. removed the airpump. that helped some too. replaced the old HE's with a decent used set, new muffler (the old one had all sorts of holes in it), and bypassed the EGR system: now, on all but the hottest days or steepest hills, it doesn't crawl much above 210 -- and usually is more towards 205 (between the "E" and the "M").

good enough for me.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 18th April 2024 - 04:09 PM