Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
 Reply to this topicStart new topic
> Stub Axle question -- CV's to use?, anyone remember these from Pelian?
nine14cats
post Jul 27 2006, 09:08 AM
Post #1


Bill Pickering -- 914-6 GT aka....Leeloo
****

Group: Members
Posts: 2,618
Joined: 10-February 03
From: Campbell, CA
Member No.: 287
Region Association: None
I was cleaning out my parts shelf last night and came across a brand new set of stub axles that I purchased from Pelican a few years back. These were the ones where you can use late model CV's I believe and are mounted in the trailing arms.

Does anyone know anything about these things? I honestly cannot remember why I bought them as The Beast already has axles and such. But I did and I have a brand new set.

I'm going to fire sale them out, but I want to provide information for the new owner.

The ultimate brain fade..... (IMG:style_emoticons/default/blink.gif)

(IMG:style_emoticons/default/laugh.gif)

Here's a pic of them.....

Bill P.


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Jeroen
post Jul 27 2006, 09:14 AM
Post #2


914 Guru
*****

Group: Members
Posts: 7,887
Joined: 24-December 02
From: The Netherlands
Member No.: 3
Region Association: Europe
can you post the part#'s
that may be helpfull identifying them
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nine14cats
post Jul 27 2006, 09:19 AM
Post #3


Bill Pickering -- 914-6 GT aka....Leeloo
****

Group: Members
Posts: 2,618
Joined: 10-February 03
From: Campbell, CA
Member No.: 287
Region Association: None
Hi Jeroen,

I looked on the stub axles and there is no stamping on them with a p/n. I also looked on Pelican's site and could not find them.

Maybe Dave D. remembers the particulars on these axles....

Bill P.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
db9146
post Jul 27 2006, 09:25 AM
Post #4


Senior Member
***

Group: Members
Posts: 953
Joined: 21-December 04
From: Atlanta, GA
Member No.: 3,315
Region Association: None
I'm interested in them as soon as you find out a little more about the CV joint to use.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Phoenix-MN
post Jul 27 2006, 09:53 AM
Post #5


Senior Member
***

Group: Members
Posts: 927
Joined: 23-January 04
From: ST. Bonifacius,MN
Member No.: 1,590
I have the same stub axles from Pelican. The use the stock CV's and the splines fit the 1970 911 hubs.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nine14cats
post Jul 27 2006, 06:53 PM
Post #6


Bill Pickering -- 914-6 GT aka....Leeloo
****

Group: Members
Posts: 2,618
Joined: 10-February 03
From: Campbell, CA
Member No.: 287
Region Association: None
QUOTE(Phoenix-MN @ Jul 27 2006, 08:53 AM) *

I have the same stub axles from Pelican. The use the stock CV's and the splines fit the 1970 911 hubs.


Thanks Paul! (IMG:style_emoticons/default/clap56.gif)

So I must have bought them so I wouldn't have to either drill out the -4 hubs or buy the Rich Johnson hubs.

Hmmm....I DID buy Rich's hubs for the 914-6 race car....I wonder why I kept these...must have been for the street V8 project I always wanted to do....but I bought JLO, which already had the 5 lug conversion.

Anyone else forget things? (IMG:style_emoticons/default/blink.gif)

I worry myself sometimes....

Bill P.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
neo914-6
post Aug 2 2006, 12:16 AM
Post #7


neo life
*****

Group: Members
Posts: 5,086
Joined: 16-January 03
From: Willow Glen (San Jose)
Member No.: 159
QUOTE(nine14cats @ Jul 27 2006, 05:53 PM) *

QUOTE(Phoenix-MN @ Jul 27 2006, 08:53 AM) *

I have the same stub axles from Pelican. The use the stock CV's and the splines fit the 1970 911 hubs.


Thanks Paul! (IMG:style_emoticons/default/clap56.gif)

So I must have bought them so I wouldn't have to either drill out the -4 hubs or buy the Rich Johnson hubs.

Hmmm....I DID buy Rich's hubs for the 914-6 race car....I wonder why I kept these...must have been for the street V8 project I always wanted to do....but I bought JLO, which already had the 5 lug conversion.

Anyone else forget things? (IMG:style_emoticons/default/blink.gif)

I worry myself sometimes....

Bill P.


Hey Bill,

I just found you had 914 axles and CV's on your old race car. How did you fit them in 5 lug hubs? Are they special stub axles? I was hoping my 911 & 930 CV/axles would bolt up to them. Fortunately I have 5 lug hubs in trailing arms that I bought for the V8 car.

Memory fade is a common occurance but then I have limited capacity in there (IMG:style_emoticons/default/laugh.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
nine14cats
post Aug 2 2006, 01:12 AM
Post #8


Bill Pickering -- 914-6 GT aka....Leeloo
****

Group: Members
Posts: 2,618
Joined: 10-February 03
From: Campbell, CA
Member No.: 287
Region Association: None
QUOTE(neo914-6 @ Aug 1 2006, 11:16 PM) *

QUOTE(nine14cats @ Jul 27 2006, 05:53 PM) *

QUOTE(Phoenix-MN @ Jul 27 2006, 08:53 AM) *

I have the same stub axles from Pelican. The use the stock CV's and the splines fit the 1970 911 hubs.


Thanks Paul! (IMG:style_emoticons/default/clap56.gif)

So I must have bought them so I wouldn't have to either drill out the -4 hubs or buy the Rich Johnson hubs.

Hmmm....I DID buy Rich's hubs for the 914-6 race car....I wonder why I kept these...must have been for the street V8 project I always wanted to do....but I bought JLO, which already had the 5 lug conversion.

Anyone else forget things? (IMG:style_emoticons/default/blink.gif)

I worry myself sometimes....

Bill P.


Hey Bill,

I just found you had 914 axles and CV's on your old race car. How did you fit them in 5 lug hubs? Are they special stub axles? I was hoping my 911 & 930 CV/axles would bolt up to them. Fortunately I have 5 lug hubs in trailing arms that I bought for the V8 car.

Memory fade is a common occurance but then I have limited capacity in there (IMG:style_emoticons/default/laugh.gif)


Hi Felix,

The 5 lug axles in your car are the special 914-6 conversion axles that Rich Johnson produces. I bought them through Brad in 2003 if my fading memory serves me..... (IMG:style_emoticons/default/blink.gif)

(IMG:style_emoticons/default/laugh.gif)

I think Rich Johnson still makes them.

Bill P.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
914Sixer
post Aug 2 2006, 08:47 PM
Post #9


914 Guru
*****

Group: Members
Posts: 8,883
Joined: 17-January 05
From: San Angelo Texas
Member No.: 3,457
Region Association: Southwest Region
I am also interested in them if you are selling. Paypal?
User is online!Profile CardPM
Go to the top of the page
+Quote Post
So.Cal.914
post Aug 2 2006, 08:54 PM
Post #10


"...And it has a front trunk too."
*****

Group: Members
Posts: 6,588
Joined: 15-February 04
From: Low Desert, CA./ Hills of N.J.
Member No.: 1,658
Region Association: None
QUOTE(nine14cats @ Jul 27 2006, 05:53 PM) *

Anyone else forget things? (IMG:style_emoticons/default/blink.gif)
Bill P.


What was the question?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
neo914-6
post Aug 2 2006, 09:08 PM
Post #11


neo life
*****

Group: Members
Posts: 5,086
Joined: 16-January 03
From: Willow Glen (San Jose)
Member No.: 159
Bill,

Rich tells me he doesn't build axles only 5x130 hub conversions. I wouldn't think you would run redrilled hubs on the race car? (IMG:style_emoticons/default/idea.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 19th May 2024 - 12:57 PM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...