 Removal of Targa bar pad |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Richard Casto |
 Aug 27 2006, 10:34 AM
Post
#1
|
|
Blue Sky Motorsports, LLC  Group: Members Posts: 1,465 Joined: 2-August 05 From: Durham, NC Member No.: 4,523 Region Association: South East States  |
I need to remove my Targa bar pad. I have removed the shoulder belt, pads right behind the belts, Targa trim and now am stuck on the bar pad. There looks to be screws deep in the pad. I “believe” I have loosened those. Some look to be missing (not surprising as previous owner seemed to have lost about 20% of the fasteners for most everything I have disassembled so far). Anyhow, it just doesn’t seem to want to budge. Not sure which way it is supposed to come off (Out toward front of car? Down?) I assume that the latch hardware comes off after the pad is removed? Any tips on this?
|
   |
 
|
Posts in this topic
Richard Casto Removal of Targa bar pad Aug 27 2006, 10:34 AM
PRS914-6 I had the same issue. If it does not come right o... Aug 27 2006, 11:38 AM computers4kids Once you do it off, you better get a 6 pack of bee... Aug 27 2006, 02:18 PM Lou W I just removed a pad today, there are 12 screws ho... Aug 27 2006, 02:27 PM Richard Casto Thanks for the tips. I will try to see if I can f... Aug 31 2006, 09:17 PM jdogg Richard-
As long as you have the screws out, it s... Sep 1 2006, 06:15 AM
jk76.914 The latch trim plates have to come off. These are... Sep 1 2006, 10:01 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 04:50 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.