Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Engine Oil Leaks, Engine Oil Leaks
KJJ-74-914
post Nov 28 2003, 04:10 PM
Post #1


Newbie
*

Group: Members
Posts: 30
Joined: 28-November 03
From: Antioch, IL
Member No.: 1,401



After letting my 1974 914 sit this year, I decided to pull the engine this morning to start my winter project of replacing the leaking seals. The engine is a 1.8 with 2.0 bore cylinders, euro pistons and fuel injection. The engine has 3000+- miles on it and is a great runner!! It started leaking oil 2 years ago so I decided not to drive it until I fixed the leaks.

I plan on replacing the oil cooler seals, pushrod tube seals and pressure switch. What else should I replace? Best sources?

Also, the thermostatic cooling set up has been disconnected and I'd like to repair it. This is the flapper under the cooling shroud with the cable that runs down to a cam that appears to temperature controlled. Where can I get parts for this system or am I better off leaving it disconnected?

Thanks in advance.

Kirk
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
KJJ-74-914   Engine Oil Leaks   Nov 28 2003, 04:10 PM
seanery   Welcome to the board Kirk! You'll get qui...   Nov 28 2003, 04:17 PM
thesey914   Might want to replace the flywheel oil seal..prett...   Nov 28 2003, 04:30 PM
KJJ-74-914   While the engine was in the car it appears that mo...   Nov 28 2003, 06:07 PM
SirAndy  

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

- Lo-Fi Version Time is now: 19th May 2024 - 08:09 PM