 Eastwood's Chassy Black paint, Is it supposed to be this soft? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VaccaRabite |
 Apr 25 2007, 08:33 AM
Post
#1
|
|
En Garde!  Group: Admin Posts: 13,444 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region  |
I have painted the underside of my car with Eastwood's Cahssie Black paint. the problem is, its really soft.
I scraped and aircraft strippered and wire bruished the underside of my car down to bare metal (was that ever fun) and then cleaned it and painted it. It was my understanding that Chassie Black was supposed to be some tough stuff. I put on 2 coats. I can scratch it off easily with my finger nail, 2 days later. What gives? Is the paint soft? Should I bite the bullet and repaint with bedliner or something? I also have Eastwoods Rust Converter and Rust Encapsulator. I used the converter sunday on a few spots, and then put a coat of Encapsulator over that. My plan was then to paint the entire engine bay in Chassie Black, but if the paint sucks, I guess I'll have to find somehting else. Zach |
   |
 
|
Posts in this topic
Vacca Rabite Eastwood's Chassy Black paint Apr 25 2007, 08:33 AM
rmital ...I painted the undercarriage (POR15) of my car m... Apr 25 2007, 08:47 AM Vacca Rabite I've registered to Eastwoods forum to ask abou... Apr 25 2007, 11:07 AM PanelBilly I'm not sure about the paint you're using,... Apr 25 2007, 11:55 AM kart54 There was another thread on the old site about the... Apr 25 2007, 12:32 PM Vacca Rabite Okay, well in that case I will attempt to un-bunch... Apr 25 2007, 12:35 PM Joe Owensby I used their Extreme Chassis black on my trailing... Apr 26 2007, 06:32 PM 9146986 Sounds like you can't do much until you see wh... Apr 26 2007, 06:50 PM
Vacca Rabite Sadly, I am still waiting for one of their admins ... Apr 26 2007, 09:51 PM Bartlett 914
Sadly, I am still waiting for one of their admins... Apr 27 2007, 07:25 AM Vacca Rabite
So where is the car and in what environment? Is ... Apr 27 2007, 07:33 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 12:18 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.