Yellow, Ayup, we gots... |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Yellow, Ayup, we gots... |
J P Stein |
Dec 7 2003, 04:13 PM
Post
#1
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
...one trailing arm semi-done.
The IDs of the trailing arm pivot bores were out-of-round and not in line.....big surprise, eh? The short side was about .015 O/R.....apparently due to the welding adjacent to that side. Get out the die grinder and it's many useful attachments, calipers, and poke & hope. Got it "PFCE" and tapped it thru till it hit the far side....then got out the BFH & drove it home. Sealed it all up with etch primer....it ain't going nowhere. The bearings dropped in..after more primer. Piece of cake. Attached thumbnail(s) |
redshift |
Dec 7 2003, 04:21 PM
Post
#2
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
Nice primer.
What color are they going to be? M |
joea9146 |
Dec 7 2003, 04:25 PM
Post
#3
|
Senior Member Group: Members Posts: 663 Joined: 10-February 03 From: Denver, NC Member No.: 283 Region Association: None |
Very Nice..... You make it to pretty u wont wana drive it (IMG:style_emoticons/default/wink.gif)
|
J P Stein |
Dec 7 2003, 04:28 PM
Post
#4
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Your favortie color is underneath the yellow, dickweed.
Iff'n I had 50 more free rattle cans of the stuff, I'd paint the whole car jest like it. |
ChrisReale |
Dec 7 2003, 04:29 PM
Post
#5
|
Sleazy Group: Members Posts: 2,665 Joined: 20-January 03 From: San Francisco Member No.: 176 |
Nice JP. Im going to do the front and rear Mueller bearings as my initiation to California. then maybe those Tarret sphericals if B-Hole doant ask for too much labor...
|
J P Stein |
Dec 7 2003, 04:32 PM
Post
#6
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
QUOTE(ChrisReale @ Dec 7 2003, 02:29 PM) Nice JP. Im going to do the front and rear Mueller bearings as my initiation to California. then maybe those Tarret sphericals if B-Hole doant ask for too much labor... He's got your car, Chris. That would be Mr. B-hole. (IMG:style_emoticons/default/wink.gif) |
redshift |
Dec 7 2003, 04:37 PM
Post
#7
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
I hope someone gives you a case of Dr. Seuss colored paint, and you end up with multi-colored stripes... oh, and that one cheap yellow arm..
(IMG:style_emoticons/default/laugh.gif) I would not paint it with my cash But any color with your stash I will not spend to paint my car I will not pay... JP I aer M |
GWN7 |
Dec 7 2003, 04:47 PM
Post
#8
|
King of Road Trips Group: Members Posts: 6,280 Joined: 31-December 02 From: Winnipeg, MB, Canada Member No.: 56 Region Association: Northstar Region |
Does this mean we should start a "Send your extra cans of paint to J P" thread? (IMG:style_emoticons/default/laugh.gif)
Looks good (IMG:style_emoticons/default/smile.gif) |
ChrisReale |
Dec 7 2003, 06:20 PM
Post
#9
|
Sleazy Group: Members Posts: 2,665 Joined: 20-January 03 From: San Francisco Member No.: 176 |
I think I am going to have my A-Arms and trailing arms powder coated. Looks good.
|
Katmanken |
Dec 7 2003, 07:05 PM
Post
#10
|
You haven't seen me if anybody asks... Group: Members Posts: 4,738 Joined: 14-June 03 From: USA Member No.: 819 Region Association: Upper MidWest |
Hey!
I'm gonna go out in my garage and see if that halfa gallon of Saturn Yellow is still there..... If it aint, I got a good idea who took it. If they did take it, they probably thought no one would look under their car..... (IMG:style_emoticons/default/laugh.gif) So this make it easier to find your car when ya roll it? I'd put black stripes on those suckas......Really make them stand out.... Ken |
J P Stein |
Dec 7 2003, 07:11 PM
Post
#11
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
You have been hanging around with the Bradpac. (IMG:style_emoticons/default/laugh.gif)
Leaving Meullers bearings out of the total, I have practially no money, but a BUNCH of work in the A arms and trailing arms. I also have spares for all....cause they are "expendables". Rattle can wurks for me. On another note: I pulled my rear hubs & wheel bearings. 2 different manf. wheel brgs...long story.....anyhew, one fell apart as usual while driving out the hub. The other stayed intact. The FAG bearing looks like a winner and the SKF the looser. So, I fergit where I got the FAG bearing (try to control yourself, Miles). I need 2 new ones, any clues? Also need .5 in longer studs (this is gonna be too much for Miles) (IMG:style_emoticons/default/laugh.gif) |
redshift |
Dec 7 2003, 07:21 PM
Post
#12
|
Bless the Hell out of you! Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869 |
I don't care about your personal life, just that I can rib you about your paint.
(IMG:style_emoticons/default/wink.gif) M |
Aaron Cox |
Dec 7 2003, 07:26 PM
Post
#13
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
QUOTE(J P Stein @ Dec 7 2003, 06:11 PM) (this is gonna be too much for Miles) (IMG:style_emoticons/default/laugh.gif) LOL.... (IMG:style_emoticons/default/laugh.gif) |
Lo-Fi Version | Time is now: 15th May 2024 - 01:01 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |