4 lug wheels to fill out flares?, Are there any? Has anyone done it? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
4 lug wheels to fill out flares?, Are there any? Has anyone done it? |
LowGT |
Jun 14 2007, 09:24 PM
Post
#1
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
Yup, so are there any 4 lug wheels out there to fill out a flared car? Has anyone used 4 luggers on a flared car? How did you do it, and do you have any pics? Dan |
ws91420 |
Jun 14 2007, 09:27 PM
Post
#2
|
Yes I have one a Lensley 914 Group: Members Posts: 2,063 Joined: 10-September 03 From: Ruther Glen,VA (halfway between sticks and civilization) Member No.: 1,137 Region Association: MidAtlantic Region |
I know a member here root has a set of black NASCAR/wagon wheel looking set on his car.
|
ConeDodger |
Jun 14 2007, 09:39 PM
Post
#3
|
Apex killer! Group: Members Posts: 23,591 Joined: 31-December 04 From: Tahoe Area Member No.: 3,380 Region Association: Northern California |
Yup, so are there any 4 lug wheels out there to fill out a flared car? Has anyone used 4 luggers on a flared car? How did you do it, and do you have any pics? Dan Here is what i would do. I know this can be done too because he offered to do it for me. Take a set of 4 lug Fuchs and send them to Harvey Wiedman. Tell him how wide you want them. He will widen them and refinish them and all you have to do is write a check for more than your car is worth... (IMG:style_emoticons/default/biggrin.gif) Just kidding! But it will be a big big check. (IMG:style_emoticons/default/sad.gif) |
LowGT |
Jun 14 2007, 09:41 PM
Post
#4
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
I know a member here root has a set of black NASCAR/wagon wheel looking set on his car. Like these? This is member porsha916's car. I sent him a pm about them but he hasn't been online since then. Attached image(s) |
LowGT |
Jun 14 2007, 09:43 PM
Post
#5
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
|
LowGT |
Jun 14 2007, 09:51 PM
Post
#6
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
Here's root's car. His wheels are very similar.
Attached thumbnail(s) |
ws91420 |
Jun 14 2007, 09:59 PM
Post
#7
|
Yes I have one a Lensley 914 Group: Members Posts: 2,063 Joined: 10-September 03 From: Ruther Glen,VA (halfway between sticks and civilization) Member No.: 1,137 Region Association: MidAtlantic Region |
Yep like those
|
LowGT |
Jun 14 2007, 10:01 PM
Post
#8
|
1.8 and Proud! Group: Members Posts: 583 Joined: 2-October 05 From: Wylie, TX Member No.: 4,904 Region Association: Southwest Region |
|
ws91420 |
Jun 14 2007, 10:02 PM
Post
#9
|
Yes I have one a Lensley 914 Group: Members Posts: 2,063 Joined: 10-September 03 From: Ruther Glen,VA (halfway between sticks and civilization) Member No.: 1,137 Region Association: MidAtlantic Region |
Try Pack racing Products http://www.packracingproducts.com/index.html
|
jasons |
Jun 14 2007, 10:34 PM
Post
#10
|
Jackstand Extraordinaire Group: Members Posts: 2,002 Joined: 19-August 04 From: Scottsdale, AZ Member No.: 2,573 Region Association: None |
I had these custom Pedrinis. They were built into 16x8's and 9's IIRC. Don't ask me who made them. I bought them on ebay and I never used them. I ended buying a car with a good 5 lug conversion. They were really nice. I sold them to a club member, maybe he will chime in.
(IMG:http://members.cox.net/jasons7/pedrinis.jpg) |
SirAndy |
Jun 15 2007, 12:45 AM
Post
#11
|
Resident German Group: Admin Posts: 41,644 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
Yup, so are there any 4 lug wheels out there to fill out a flared car? Has anyone used 4 luggers on a flared car? How did you do it, and do you have any pics? i used to have a set of 4-lug centerlines that were perfect offset to fill out the GT flares. 7" x 14 with 225 tires ... (IMG:style_emoticons/default/bye1.gif) Andy Attached image(s) |
nomore9one4 |
Jun 15 2007, 07:41 AM
Post
#12
|
Member of the Eastcoast Thread Killers Club Group: Members Posts: 2,666 Joined: 26-December 02 From: Pittsburgh,Pa.15237 Member No.: 14 Region Association: None |
You can get the 4 lug wheels from JC Whitney for cheap. They have many sizes available.
|
URY914 |
Jun 15 2007, 07:54 AM
Post
#13
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 120,693 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
My ax car has 15 x 8 four lugs fake Centerlines. The look like the ones in Andy's pic above. Good luck finding a set. But you may try Thesamba.com wheel classifed section. There is a whole bunch of crazy 4-lug stuff on there.
|
i love porsche |
Jun 15 2007, 09:54 AM
Post
#14
|
Senior Member Group: Members Posts: 1,547 Joined: 6-May 04 From: Nutley, NJ Member No.: 2,030 Region Association: North East States |
ive got those pedrinis now..they are very nice and deeeeep...when the car is all said and done ill have those for the street tires, and im planning on buying some diamond racing wheels for track tires
Attached thumbnail(s) |
Howard |
Jun 15 2007, 10:08 AM
Post
#15
|
Incontin(g)ent Member Group: Benefactors Posts: 5,785 Joined: 24-July 03 From: Westlake Village, CA Member No.: 943 Region Association: None |
Centerlines with 245/50 front, 265/50 rear. I have an extra set (IMG:style_emoticons/default/smile.gif)
|
dr914@autoatlanta.com |
Jun 15 2007, 10:13 AM
Post
#16
|
914 Guru Group: Members Posts: 7,866 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
I had these custom Pedrinis. They were built into 16x8's and 9's IIRC. Don't ask me who made them. I bought them on ebay and I never used them. I ended buying a car with a good 5 lug conversion. They were really nice. I sold them to a club member, maybe he will chime in. (IMG:http://members.cox.net/jasons7/pedrinis.jpg) good job! We are having made in australia some custom four lug 914-4 factory fuchs for flared and stock applications in 7x16 8x16 and 9x16 Pictures coming soon! The ones I have seen are very exciting and should give us all a cheap but high quality wheel to put on our 914s. As you probably know American Eagle has recently discontinued their 5.5x15 fuchs repro so this one will come just in time |
914nerd |
Jun 15 2007, 10:25 AM
Post
#17
|
Who you callin' a "Member"? Group: Members Posts: 416 Joined: 18-July 06 From: Los Alamos, NM Member No.: 6,461 |
George,
Any idea when you are likely to have those and what the pricing might be? |
DEC |
Jun 15 2007, 10:32 AM
Post
#18
|
Senior Member Group: Members Posts: 630 Joined: 10-November 05 From: Rehburg Member No.: 5,104 Region Association: Germany |
|
DEC |
Jun 15 2007, 10:34 AM
Post
#19
|
Senior Member Group: Members Posts: 630 Joined: 10-November 05 From: Rehburg Member No.: 5,104 Region Association: Germany |
|
nomore9one4 |
Jun 15 2007, 11:45 AM
Post
#20
|
Member of the Eastcoast Thread Killers Club Group: Members Posts: 2,666 Joined: 26-December 02 From: Pittsburgh,Pa.15237 Member No.: 14 Region Association: None |
|
Lo-Fi Version | Time is now: 18th May 2024 - 10:31 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |