 took some pics of my rotors etc and need someone to diagnose, do i need new rotors? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| pba110 |
 Aug 5 2007, 07:51 PM
Post
#1
|
|
Newbie  Group: Members Posts: 47 Joined: 19-July 07 From: east coast Member No.: 7,921  |
hey,
so my rear brakes are squeeling pretty loud about 50% of the time that i'm braking. i'm thinking i must have let the hand brake on at some point or another. anyway, as far as i know these are original rotors (90k on car). fairly smooth feeling. the pads have a little life left on them... at least it looks that way to my untrained eye. anyway, i'd rather just order new pads. i'm a pretty mellow driver..but if it's time for new rotors...then it's time what do you think? (i wanted to measure them but i could not find a ruler in the entire house...hopefully a quarter will be enough for one of you guys, i know it's supposed to be at least 10 mm (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1564.jpg) moving on...aren't i missing a cover on this linkage? (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1572.jpg) how are these tranny mounts looking? (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1574.jpg) (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1570.jpg) finally, any idea what chord got cut out this set coming out of the fire wall in the engine bay? (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1565.jpg) what does this adjust? it look like there's another adjusting mechanism attached downstream of the fuel pump. i'm sorry i'm still getting my feet wet working on cars (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1567.jpg) shot of it's location in engine bay... (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1568.jpg) this would be the coil? (IMG:http://i35.photobucket.com/albums/d189/pba110/914/IMG_1566.jpg) with the switch to the carb, the layout of the engine is a bit different than the manual's so i just want to make sure i'm not calling someting a coil when it's something else? again, thanks in advance for all the help guys, one day soon with me reading the manuals every free second i get and this board, ill have half an idea what i'm doing... |
   |
 
|
Posts in this topic
pba110 took some pics of my rotors etc and need someone to diagnose Aug 5 2007, 07:51 PM
Pat Garvey You're measuring the wrong place on the rotors... Aug 5 2007, 08:03 PM Brando Rotors... Feel the lip. 1MM? 2MM? One of those thi... Aug 5 2007, 08:06 PM pba110 thanks!
that helped a lot, seriously.
so the l... Aug 5 2007, 08:09 PM
toomanyinkc
thanks!
that helped a lot, seriously.
so the ... Aug 5 2007, 08:20 PM hwgunner I just measured a quarter and 100 is to the bottom... Aug 5 2007, 08:10 PM degreeoff WOW we are up to almost 8000 members! WELCOME ... Aug 5 2007, 08:21 PM SirAndy the big round washers on your transmission mounts ... Aug 5 2007, 08:29 PM r_towle Hi,
Lets see,
Rotors, well, if you are up for repl... Aug 5 2007, 08:31 PM SirAndy
Yes, its an oil temp and pressure sensor.
no, it... Aug 5 2007, 08:39 PM pba110
wait...i'm confused...which pic are you pull... Aug 5 2007, 08:49 PM SirAndy
wait...i'm confused...which pic are you pulli... Aug 5 2007, 09:03 PM pba110 okay, sounds fair, is that going to send oil every... Aug 5 2007, 09:34 PM Eric_Shea
He's full of'em tonight... .004" (... Aug 5 2007, 10:00 PM Loser_Cruiser I'd be willing to guess that the "chord t... Aug 5 2007, 10:56 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 28th May 2024 - 09:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.