 SOB, Warm motor idles low |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| redshift |
 Dec 30 2003, 01:36 PM
Post
#1
|
|
Bless the Hell out of you!  Group: Members Posts: 10,926 Joined: 29-June 03 Member No.: 869  |
I went to handle my registration... fine.. get back in car, have to take side streets.. main roads stacked up..
I drove into downtown, engine fully warmed up, spent two minutes on the starter trying to get her to go, flutter, flutter, flutter.. never really ignited anything, just finally the revs went up.. and she's idling like 300.. I've never had that happen. Ususally, the unstable nature of her idle between starts (if idle settles at 900, it's going to 900 on idle for that trip, til you crank it again) can be dealt with by staying in the tq curve for the last minute before parking it. Not this time. So, I drove home, shut down, and she cranked right up that time, still idles in the low hundreds.. there can't be any oil pressure down there, so I keep my foot on it. I hope this isn't a valve related problem, one more valve train related problem, and goodbye flat 4s, it's been fun. M |
   |
 
|
Posts in this topic
redshift SOB Dec 30 2003, 01:36 PM
Qarl :lol: Dec 30 2003, 01:37 PM redshift :trophy:
ASSHOLE!
M Dec 30 2003, 01:39 PM ChrisReale make sure everything in the engine compartment tha... Dec 30 2003, 03:32 PM redshift I have.
I am chasing the possibility of a failure... Dec 30 2003, 03:34 PM fuch toy Got gas? :blink: Dec 30 2003, 03:42 PM redshift Gas, yep... only running the most expensive of the... Dec 30 2003, 03:42 PM Bruce Allert Hey, mine does that. Gets warm & idles around 300.... Dec 30 2003, 04:16 PM redshift I taped off all air holes, started it, readjusted ... Dec 30 2003, 04:24 PM redshift and just to share with you all..
I can't beli... Dec 30 2003, 04:27 PM 3d914 redshift,
This may sound dizzy, but check the wir... Dec 30 2003, 10:03 PM redshift Thanks for saying that, I snooped around it first ... Dec 30 2003, 10:18 PM Bruce Allert Miles,
thank you for "Because"
I had no Idea ther... Dec 30 2003, 10:20 PM Queenie ... Dec 30 2003, 10:37 PM redshift You lil shit! :trophy: you and Q'arl (The... Dec 30 2003, 10:42 PM Bleyseng Yep, could be a bad connection on the CHT wire or ... Dec 30 2003, 11:10 PM redshift Thanks Geoff, I just perused the Anders Djet WebBi... Dec 30 2003, 11:30 PM Bleyseng I have a extra AAR valve but its made of unobtaini... Dec 31 2003, 12:00 AM ChrisReale Brad has about 10 laying around his shop. I know ... Dec 31 2003, 12:03 AM redshift Fine then, I'll just stick one tube in my ass,... Dec 31 2003, 12:31 AM Brad Roberts Dont install the next one you get. Leave it hangin... Dec 31 2003, 04:32 AM Gint QUOTE
Bruce Allert ... Dec 31 2003, 12:06 PM redshift 3rd AAR sticks partially (teilweise) open when ful... Dec 31 2003, 01:32 PM Gint Zois has one. :bootyshake: Dec 31 2003, 02:42 PM redshift Update: I FOUND A HAIRY ASS PICTURE!
I got th... Dec 31 2003, 03:17 PM Brad Roberts Steve you are correct.. I left out the part of run... Dec 31 2003, 03:22 PM redshift Oh, the AAR, yeah, it's as toasted as the othe... Dec 31 2003, 03:24 PM Brad Roberts Fix it. If it gets hot.. you can clean it up and i... Dec 31 2003, 03:25 PM redshift And Geoff went ... Jan 1 2004, 01:23 AM
Brad Roberts In 18 years I have only ran across 2 AAR's tha... Jan 1 2004, 02:53 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 04:24 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.