 Progress today., Getting damn close |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| KaptKaos |
 Nov 10 2007, 07:11 PM
Post
#1
|
|
Family  Group: Members Posts: 4,009 Joined: 23-April 03 From: Near Wausau Member No.: 607 Region Association: Upper MidWest  |
I have my carbs mounted and i hooked up most of the HE stuff underneath. I made a bracket for my throttle cable.
I reseated the dizzy, and plugged in the plug wires to the dizzy. Before we installed the motor, we marked the fan, and left it at 12 o'clock. Now with the dizzy installed, the rotor is (I assume) pointing at #1. I assume, maybe wrongly, that the dizzy fires clockwise. So 1,4,3,2 is how I wired them around. So ok so far? I have the hex bar linkage for the carbs. Problem seems to be that the bracket that I made might not be long enough. If I connect everything up as is, I don't get enough rotation to open the carbs all the way. Dunno if I am missing something, but any advice would be appreciated. I am hoping to fire it tomorrow. (IMG:style_emoticons/default/biggrin.gif) We'll see. |
   |
 
|
Posts in this topic
KaptKaos Progress today. Nov 10 2007, 07:11 PM
Blood red 914-6gt You Should get a linkage from Triad West. That wou... Nov 10 2007, 07:50 PM KaptKaos Thanks Jon. I really need to make the CB Hex link... Nov 10 2007, 08:33 PM Aaron Cox dizzy. pop cap off. twist rotor (advance). which w... Nov 10 2007, 09:09 PM
KaptKaos
dizzy. pop cap off. twist rotor (advance). which ... Nov 10 2007, 10:39 PM Aaron Cox offset it an inch or two until it has a flat base ... Nov 10 2007, 11:15 PM rhodyguy do your heads have the small vent tubes? if so, do... Nov 11 2007, 09:59 AM KaptKaos
do your heads have the small vent tubes? if so, d... Nov 11 2007, 12:27 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 12:17 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.