 993 brakes?, Can I make them work? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| MikeHall |
 May 4 2008, 03:52 PM
Post
#1
|
|
Member  Group: Members Posts: 55 Joined: 28-April 08 From: Camilla, GA Member No.: 8,983 Region Association: None  |
Can I make 993 brakes work on a 911 suspended 914? If so would it be a bolt on or would i have to make custom brackets for the calipers to bolt up?
Mike |
   |
 
|
Posts in this topic
MikeHall 993 brakes? May 4 2008, 03:52 PM
Bigbohr You cannot just bolt these up to a 914/911.
I have... May 4 2008, 04:41 PM MikeHall Being the 993 brakes would require so much work to... May 4 2008, 04:52 PM Bigbohr Actually, what 911 suspension do you have? If you ... May 4 2008, 05:08 PM Wilhelm Not to be a thread stealer, but.......
I'm tr... May 4 2008, 05:57 PM
Bigbohr
Not to be a thread stealer, but.......
I'm t... May 4 2008, 06:08 PM race914 Lots of good info here
http://www.vehiclecraft.co... May 4 2008, 06:36 PM Jeff Hail
Can I make 993 brakes work on a 911 suspended 914... May 4 2008, 06:53 PM MikeHall I dont have the suspension yet but it was later mo... May 4 2008, 07:31 PM Mark Henry The old 914club....hope it's OK to say this...... May 4 2008, 08:30 PM Eric_Shea
Not only can you say it... we'll even let yo... May 4 2008, 09:09 PM Mark Henry
Not only can you say it... we'll even let y... May 5 2008, 05:52 PM MikeHall This 914 is getting a EG33 with WRX 5sp which is 2... May 4 2008, 09:25 PM ClayPerrine I suggest that you get Boxster calipers.
You can ... May 4 2008, 09:52 PM davep A good resource on brakes:
http://www.pelicanparts... May 5 2008, 08:58 AM davep Mueller was the guy designing the 'billet hubs... May 6 2008, 09:22 AM PRS914-6 Here you go.....993 on a 914.
For the front with ... May 6 2008, 10:29 AM Aaron Cox with 3.5" struts... you can buy Adapters to p... May 6 2008, 10:43 AM PRS914-6 Don't forget, if you switch, you have the emer... May 6 2008, 11:56 AM MikeHall I dont mind a job as I enjoy projects more than an... May 6 2008, 02:46 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 25th May 2024 - 06:01 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.