 /6 guys - need piston help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ahdoman |
  Dec 5 2008, 06:45 PM
Post
#1
|
|
It's phonetic...Ah-D-O-Man (Audioman)  Group: Members Posts: 667 Joined: 7-November 05 From: Santa Clarita, Ca. Member No.: 5,084 Region Association: Southern California  |
I've got a 2.4T (73 1/2) that I have torn down. This is what the pistons look like that are in the engine...
 What's the difference between these and these that are typically on eBay...  Also, These are both 84mm. Since they list these pistons as for a 2.2 / 2.4 is it just a different stroke between the 2 engines? If that's the case are the cylinders interchangeable? |
   |
 
|
Posts in this topic
ahdoman /6 guys - need piston help Dec 5 2008, 06:45 PM
sww914 That's a CIS piston that you have, you need th... Dec 5 2008, 07:29 PM Dr Evil 2.4 CIS pistons are not very common. However, they... Dec 5 2008, 07:45 PM ahdoman I'm trying to stay stock (CIS) but I want to r... Dec 5 2008, 08:05 PM Dr Evil You can go up to a 2.7L and have CIS, but you will... Dec 5 2008, 08:08 PM Cap'n Krusty 2.0 & 2.2 cranks and rods have the same dimens... Dec 5 2008, 08:25 PM brant If you stay with CIS, then you need a CIS style pi... Dec 5 2008, 09:35 PM sixnotfour
true, but the factory T. E. S piston dictates wic... Dec 5 2008, 10:17 PM ahdoman Hey everybody thanks for the great info. Maybe I d... Dec 5 2008, 10:51 PM
ArtechnikA
Hey everybody thanks for the great info. Maybe I ... Dec 6 2008, 07:25 AM sixnotfour
Yes , but there is 0, 1, 2 factory tolerance g... Dec 6 2008, 12:04 AM ahdoman Sixnot four - Excuse my ignorance but what is a ... Dec 6 2008, 09:47 AM ArtechnikA
Sixnot four - Excuse my ignorance but what is a ... Dec 6 2008, 10:06 AM brant I'm not sure it can't (or can) be done...
... Dec 6 2008, 10:20 AM Gint I doubt JE makes a CIS style piston, but I've ... Dec 6 2008, 11:01 AM jasons Would adding Biral cylinders require head studs an... Dec 6 2008, 10:21 AM ArtechnikA
Would adding Biral cylinders require head studs a... Dec 6 2008, 10:26 AM sixnotfour Have you check ring side clearance ?
Rich whats th... Dec 6 2008, 10:30 AM ArtechnikA
Have you check ring side clearance ?
Rich whats t... Dec 6 2008, 10:46 AM J P Stein
Have you check ring side clearance ?
Rich whats t... Dec 6 2008, 11:07 AM morgan_harwell It sounds like you are happy with the stock '7... Dec 6 2008, 11:22 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 11:49 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.