 Need help with motor mesh removal |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rock914 |
 Apr 5 2009, 06:18 PM
Post
#1
|
|
rock914  Group: Members Posts: 36 Joined: 28-October 08 From: Hoopeston Ill Member No.: 9,695 Region Association: None  |
Hey guys, I need some help with how to remove the mesh grills that sit above the engine compartment. Mine have faded and they need to be removed and repainted. I don’t want to mask them off and paint them in place. I did a search here but was unable to find any thing. It appears that they are plastic retaining clips that hold the mesh in place. Can these be reused after they are removed? Are there any tricks to removing them intact? If not, can they be purchased? Thanks for your help.
Bob |
   |
 
|
Posts in this topic
rock914 Need help with motor mesh removal Apr 5 2009, 06:18 PM
Jeffs9146 I used a pair of "dyke" wire cutters and... Apr 5 2009, 10:16 PM Vacca Rabite It is held on by speed nuts. No turning required.... Apr 6 2009, 06:19 AM rhodyguy plan on new nuts. squeeze the existing nuts in hal... Apr 6 2009, 09:20 AM Jeffs9146
I have done this many times and if you turn them... Apr 6 2009, 10:18 AM
76-914
I have done this many times and if you turn the... Apr 7 2009, 10:30 PM Joe Sharp Ace has a speed nut to replace them with. Apr 6 2009, 01:47 PM rock914 thanks guys! looks like I need to get new ones... Apr 7 2009, 08:22 PM silverteener I was able to reuse mine. Be careful taking them ... Apr 7 2009, 09:57 PM Rusty The pins on the mesh grills are studier than the p... Apr 7 2009, 10:45 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 04:26 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.