 Fabrication Equipment for Sale, Sheetmetal Brake is sold |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| john rogers |
 Jul 10 2009, 09:57 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,525 Joined: 4-March 03 From: Chula Vista CA Member No.: 391  |
Millermatic 175 220 volt MIG welder with the Miller cart, Miller cover, 2 gas bottles and 25 foot long 220 volt extension cord. One bottle is for steel and one is for aluminum so when they run out you can exchange them at Airgas or some place similar. I made the extension cord and the wire is rated for 220 volt with appropriate plugs. I used this during race car fabrication and no longer have the car. Price is $750 for everything.
This is the 36 inch overall combo sheetmetal shear, brake and roller from Harbor Freight. It is mounted on a heavy duty movable table with locking wheels. The price also includes a combo bead/shear/roller for making flanges in long pieces of steel or aluminum. Also included are a set of cleco pliers and cleco rivets for sheetmetal fabrication. The combo brake weighs a ton and will require a large pickup or trailer for moving. I used this for race car fabrication and no matter what folks say about Harbor Freight stuff, this will never ever break! Price is $350 for everything. THIS HAS BEEN SOLD Contact John at 619-691-8640 if interested. |
   |
 
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th May 2024 - 11:16 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.