 my mallory may have died, how do I test it? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| VaccaRabite |
 Aug 1 2009, 10:36 PM
Post
#1
|
|
En Garde!  Group: Admin Posts: 13,444 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region  |
Engine is in. Everything is ready.
But I don't get any spark. Coil seems to be okay. I need to know if there is anyway to test the mallory? I am not getting any power to the plugs. I have tried putting a timing light on the plug wires and putting the timing light on the wire from the coil to the mallory just to see if there is currant, which there is not... I am getting power to the coil. I am SO CLOSE!!!! I just need to get this bitch running. Zach |
   |
 
|
Posts in this topic
Vacca Rabite my mallory may have died Aug 1 2009, 10:36 PM
Vacca Rabite Also, the unit worked when I pulled the engine out... Aug 1 2009, 10:38 PM Kirmizi Zach,
I just pulled out the installation instruct... Aug 1 2009, 10:48 PM
Vacca Rabite
Zach,
I just pulled out the installation instruc... Aug 1 2009, 10:52 PM brilliantrot I fried the electric portion of a mallory when my ... Aug 1 2009, 11:15 PM Vacca Rabite I have ordered a new optical sensor from CFR. I... Aug 1 2009, 11:15 PM brilliantrot Chris is good with shipping things fast as I had h... Aug 1 2009, 11:32 PM yeahmag Test procedure:
http://www.centuryperformance.com... Aug 1 2009, 11:28 PM Dr Evil From Yeahmaq's link, "you will need a bal... Aug 2 2009, 02:23 AM jim_hoyland I didn't use a ballast resistor, but used a Bo... Aug 2 2009, 05:23 PM Racer Chris Most Bosch blue coils have the required resistance... Aug 2 2009, 06:17 PM Vacca Rabite I seem to remember a chart that said what bosche b... Aug 2 2009, 06:39 PM Racer Chris IIRC a coil that measures more than 1.4 ohms on th... Aug 2 2009, 06:41 PM orange914 great to hear it's almost ready :beer2:
mike Aug 2 2009, 08:51 PM Dr Evil Your coil was 5.1K both terminals to center and 0 ... Aug 3 2009, 12:50 AM Vacca Rabite
Your coil was 5.1K both terminals to center and 0... Aug 3 2009, 07:58 AM Gint Some coils have built in or internal ballast resis... Aug 3 2009, 09:50 PM r_towle And internal ballast creates resistance.
Its also ... Aug 3 2009, 10:39 PM Vacca Rabite I have the resistor already. I was trying to dete... Aug 4 2009, 08:10 AM stepuptotheMike I went the extra step and added Mallory's line... Aug 4 2009, 09:06 AM underthetire But what if I get struck by lightning????? :D
Mi... Aug 4 2009, 09:55 AM Cupomeat
But what if I get struck by lightning????? :D
M... Aug 4 2009, 10:32 AM jim_hoyland
I went the extra step and added Mallory's lin... Aug 4 2009, 09:56 AM stepuptotheMike
I went the extra step and added Mallory's li... Aug 4 2009, 10:19 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 07:25 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.