Thanks everyone for the comments. The car is going to New Jersey.
1973 Porsche 914 2.0 #4732917759
Click to view attachment
This is a drivable project car. I bought this car three years ago from a good friend that used it as a daily driver. The car was not originally red but it was a pretty through re-spray job with the trunks/jamb/etc painted as well. It also came with a 73 2.0 parts car that was badly rusted. The parts car is gone but I have all the good parts from it. There are really too many parts to list. I have a truck and trailer so I can deliver in the Florida and the Southeast if needed. I can provide pictures of anything you want to see.
Interior:
- I have a new charcoal carpet set in the box
- Has a non working A/C system. Comes with a new in the box rotary compressor
- Stock console and a short console for the A/C unit
- Seats are recovered and have heavy duty cloth inserts. Plus two additional sets of seats
- After market leather covered steering wheel plus original steering wheel
Body:
- Some minor exterior body rust
- Floors have rusted areas but I have new replacement floors both front and rear halves
- Hell hole looks pretty good from what I can see
- I replaced the rear trunk floor last year
- Rear trunk lid was rusted but was stripped and primed and need some work to smooth it out
- I have a rear trunk gas strut kit that has never been installed
- European front and rear light lenses
- I have two roofs for it, one red and one black
- Chrome bumpers with very good rubber caps
Brakes/Wheels/Suspension:
- Five lug conversion with real 15” Fuchs
- Rear bearings and rear brake pads were replaced two years ago
- Tires are in decent shape with plenty of tread
- Shocks are Koni orange. Plus four spare Konis
- Stock front and rear sway bars
- 180 rear springs
- Spare brake calipers included
Engine-Tranny:
- 2.0 engine with dual Weber 44’s
- Stainless steel heat exchangers with Triad dual exhaust, plus a extractor and a used Monza exhaust
- Plus a second 2.0 GA engine
- I have spare alternators and starters
- Bought a new battery for it last month
- I have a spare side shift tranny that come with it.
Price $5,500.00 (reduced $500)
I'll deliver it 500 miles away for FREE!!!
Here is a link to my thread on the repairs with plenty of pictures:
http://www.914world.com/bbs2/index.php?sho...55&hl=trunk
Can I be the 1st person to Rag on your car and say it ain't worth a Plug-Nickel. Hell, there is probably a 5 Foot Lizard under the Driver's seat. 
Kidding aside, this is a very good car for the money. I've known of the car for years.
T.C.
Kidding aside, this is a very good car for the money. I've known of the car for years.
T.C.
Here is a look at the front bumper before/after.
Buyer gets the fog lights and the IMSA fiberglass front end.
Click to view attachment
Chrome bumper with fog lights, grills, hooters, and nice bumper pad and valance.
Click to view attachment
Buyer gets the fog lights and the IMSA fiberglass front end.
Click to view attachment
Chrome bumper with fog lights, grills, hooters, and nice bumper pad and valance.
Click to view attachment
Dang I am drooling over the car and parts stash...
My superior officer has very nicely said hell no to another 914.
If I was looking for a project car I would be all over this. Really an easy
project because the major welding has been done.
That muffler sounds great.
John
I just went through some of my parts and I have:
2 sets of half shafts with CV joints
1 pair of rear hubs (4 bolt)
2 pairs of seats
The original 2.0 fuel injection parts
Several sets of heater box valves, fans, and parts
(the heater boxes on the car are stainless steel)
1 side shifter tranny
1 tail shifter tranny
1 pair of rocker panels
This is in addition to the parts on the car itself.
2 sets of half shafts with CV joints
1 pair of rear hubs (4 bolt)
2 pairs of seats
The original 2.0 fuel injection parts
Several sets of heater box valves, fans, and parts
(the heater boxes on the car are stainless steel)
1 side shifter tranny
1 tail shifter tranny
1 pair of rocker panels
This is in addition to the parts on the car itself.
wow. Time to look at getting a equity loan
Which pix is the front end as to be delivered, with the IMSA front or the stock front (I like the stock front)?
Jim, URY took off the F/G IMSA and returned it to stock.
T.C.
T.C.
Would you be willing to sell the spare engine seperately?
Bill
Bill
I'm really trying to sell the whole lot as one.
But I do have some 2.0 parts (crank, cam, pistons/cyl etc) that I'll sell separably. And I have a 1.7 long block and another set of 1.7 heads that can go.
But I do have some 2.0 parts (crank, cam, pistons/cyl etc) that I'll sell separably. And I have a 1.7 long block and another set of 1.7 heads that can go.
QUOTE(type47 @ Feb 21 2010, 06:32 AM) 
Which pix is the front end as to be delivered, with the IMSA front or the stock front (I like the stock front)?
As TC said the IMSA front end has been replaced but it comes with the car as part of the deal.
Camp914 Rear trunk shock kit with instructions and all parts in original mailing tube.
Click to view attachment
Click to view attachment
Koni shocks, box of brake calipers, blue box is full of heater box parts (valves/connectors/etc), alternators, headlight parts
Click to view attachment
Click to view attachment
All 914s need one of these...
Paul,
I just don't get it
My experienced eyeballs, say this is a great deal. What's going on??? I see other advertisements showing nothing and selling at the same or more money 
BTW: I am not a buyer just an observation from the peanut gallery. Someone will get a great project. This stuff is drying up.
Tom
bump
I just don't get it
My experienced eyeballs, say this is a great deal. What's going on??? I see other advertisements showing nothing and selling at the same or more money BTW: I am not a buyer just an observation from the peanut gallery. Someone will get a great project. This stuff is drying up.
Tom
bump
Thanks Tom. I got enough parts here to nearly build two cars. I want to clean out all my street car parts in this deal. Someone out there must need something to do this Spring.
And I just added 500 miles of delivery for FREEEEEEE!!!!
And I just added 500 miles of delivery for FREEEEEEE!!!!
Economy sucks.
If I did not have my 914 already and my other projects I would snatch this up. Very good looking.
Can you post pictures of the rust and bodywork needed?
If I did not have my 914 already and my other projects I would snatch this up. Very good looking.
Can you post pictures of the rust and bodywork needed?
Bump
500 mile delivery included
500 mile delivery included
QUOTE(URY914 @ Apr 10 2010, 06:32 PM)
Bump
Price reduced to $5000.00
500 mile delivery included
URY914
Did you sell yet?? I am amazed why your 914 & Phoenix 914GT hasn't sold yet. Just wondering with all those spare parts & free delivery.
Tom
Thanks for the bump Tom. No I haven't sold it. I've gotten some lookers and questions from the Samba ad but it is still in the garage.
I've added more detailed pictures to my Flickr page and set up a seperate set for photos of the car. If you need to see more photos of some area of the car let me know. Here is a link.............
http://www.flickr.com/photos/ury914/sets/72157623768655277/
http://www.flickr.com/photos/ury914/sets/72157623768655277/
Sale pending..... 
(we need a crossed fingers smilie)
(we need a crossed fingers smilie)
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.