Really? $1 each

no where to get these in bulk? I searched McMaster Carr...

$1 each at usual suspects

figured I would buy a 25 pack like I do most stuff like this

This one?
http://www.mcmaster.com/#washers/=7453y7

You mean? http://www.mcmaster.com/#copper-flat-washers/=747qcs

not the same

Porsche item is soft copper with felt center

These are just solid copper washers

Need one of our engine building experts to chime in.....

Is there a bulk source?

Mcmaster has many much variety of sealing crush washers. Just search for "Crush Washer" or "metric crush washer." You can choose either copper or aluminum.
http://www.mcmaster.com/#crush-washers/=74mkuf

If you want the specific Porsche part, expect to pay the specific Porsche price. But, FYI, all the engine seal kits just come with the copper and aluminum variety, and they work great.

Zach

So why don't you just buy 8? You may need to bite the bullet on this outlay. Just a crazy idea....

you can certainly get a pack cheaper. Copper is expensive these days but not that expensive!

Looks like we normally order these thru Porsche. We only have 10 in stock, so it doesn't look like they fly off the shelf.

HA

Local Porsche dealer got them in 1 day for 43 cents each

I will pick them up after work

WOW! You saved 57 cents on a $1 part!


That's really going to make a positive dent in your car budget ...
Andy

just spent $243 on gunson CO meter to make up for it

They also come with the asbestos filled variety, specifically to be used on the taco plate, the drain plug, the oil pressure relief plug(s), and the sump plate. I've recommended trying the dealer for hard to get parts countless times, but few people bother .........

The Cap'n