usros
Jan 8 2011, 02:43 PM
I'm in for one.
Thanks Thom
ONTHEGRIND
Jan 8 2011, 04:07 PM
i will take one
leebenedi
Jan 8 2011, 05:15 PM
I would like to know what the shipping cost to Spain are and if you will ship there. If it is acceptable, count me in.
Thanks.
kharma
Jan 8 2011, 09:36 PM
Count me in for 1!
moparrob
Jan 8 2011, 10:55 PM
Mark, payment sent. Thanks again. Looking forward to receiving the panel.
As an aside, maybe we could start a support group for those of us who are fearful of tearing into our wiring harnesses and attempting to fix the demons which lurk therein.
rfuerst911sc
Jan 9 2011, 07:00 AM
Just in case there is any gray area with my initial questions regarding payment by check please consider me IN on this buy. Thanks for doing this.
willamp
Jan 9 2011, 07:29 AM
I would like one please. Looks like a good modification to make.
And next I want to add a terminal block to get this mess off the battery post
Click to view attachment
RJMII
Jan 9 2011, 09:06 AM
QUOTE(moparrob @ Jan 8 2011, 09:55 PM)
Mark, payment sent. Thanks again. Looking forward to receiving the panel.
As an aside, maybe we could start a support group for those of us who are fearful of tearing into our wiring harnesses and attempting to fix the demons which lurk therein.
Sure, start a thread with descriptions when you get going on them; I'm happy to work out electrical demons. There are a few of us on the board, actually. Some of the others are much better than I am, but we all help out on here.
zig-n-zag
Jan 10 2011, 11:07 PM
Count me in for one.
leebenedi
Jan 11 2011, 01:42 AM
QUOTE(leebenedi @ Jan 9 2011, 12:15 AM)
I would like to know what the shipping cost to Spain are and if you will ship there. If it is acceptable, count me in.
Thanks.
I still do not know if you will ship to Spain and what it will cost. I am interested in the group buy.
Lee
RJMII
Jan 11 2011, 03:40 PM
Sorry, I've been in the hospital the past few days.
I'm pretty sure that Mark ships to Spain. More than likely he'll use a flat rate box.
wallys914
Jan 11 2011, 05:50 PM
Still open? Count me in....
leebenedi
Jan 12 2011, 03:58 AM
No problem. Got some PM and I am in the group buy. I just need to know when to pay.
Lee
Mike Bellis
Jan 13 2011, 10:16 PM
avidfanjpl
Jan 13 2011, 11:38 PM
Mark
Please put me down for a panel and tell me where to send the dough via Paypal.
I just logged in tonight and found the thread after hearing about it.
Thanks!
John
avidfanjpl
MarcoC
Jan 14 2011, 10:25 AM
QUOTE(avidfanjpl @ Jan 14 2011, 12:38 AM)
Mark
Please put me down for a panel and tell me where to send the dough via Paypal.
I just logged in tonight and found the thread after hearing about it.
Thanks!
John
avidfanjpl
Count me in as well for one.
Marco.
warpig
Jan 15 2011, 02:37 AM
QUOTE(RJMII @ Dec 28 2010, 06:27 PM)
Due to interest and bumped engman fuse panel group buy round one, here's round two!
Only real change is the price - 93.75 each includes shipping in the US.Price has gone up due to meatal prices and shipping to Mark. He can ship out of the US but each one must be calculated for it s destination.
Click here to see the updated Engman fuse panel kit.QUOTE
The original and first plug and play fuse panel. Modern ATO style fuses with blown fuse indicator lights. Complete with instructions, wire markers and some spare led fuses.
Link to the previous group buy thread here.I want one, no phone # listed at website, sent an e-mail to Engman.. no response.
was told to reply to the thread, maybe this will get me on the list?
kharma
Jan 15 2011, 08:23 AM
QUOTE(kharma @ Jan 8 2011, 11:36 PM)
Count me in for 1!
Just let me know when and where to pay
Greenguy
Jan 15 2011, 12:39 PM
I would like one as well, let me know when and where to pay
codices
Jan 15 2011, 12:55 PM
Put me down for one.
Dave
RJMII
Jan 15 2011, 09:48 PM
QUOTE(warpig @ Jan 15 2011, 01:37 AM)
QUOTE(RJMII @ Dec 28 2010, 06:27 PM)
Due to interest and bumped engman fuse panel group buy round one, here's round two!
Only real change is the price - 93.75 each includes shipping in the US.Price has gone up due to meatal prices and shipping to Mark. He can ship out of the US but each one must be calculated for it s destination.
Click here to see the updated Engman fuse panel kit.QUOTE
The original and first plug and play fuse panel. Modern ATO style fuses with blown fuse indicator lights. Complete with instructions, wire markers and some spare led fuses.
Link to the previous group buy thread here.I want one, no phone # listed at website, sent an e-mail to Engman.. no response.
was told to reply to the thread, maybe this will get me on the list?
WarPig,
Yes, I am quite certain you are on the list. Not sure 'which list...'. j/k. You'll get a PM shortly if you haven't already.
I was finally able to get ahold of Mark after spending the week in and out of the hospital and w/out all of my whits about me...
Since we didn't give him much notice for round two on the group buy he has been checking on lead times for more parts than usual to assemble these. He just about has all of the info for the larger order of parts.
Thank you all for your interest! PM's should be going out within the next couple of days on payment info.
RJMII
Jan 15 2011, 09:50 PM
QUOTE(kg6dxn @ Jan 13 2011, 09:16 PM)
Mike,
thanks for the bump! PM your email address to me so I can send you pics.
(of something completely unrelated to this thread!)
Cairo94507
Jan 16 2011, 08:32 AM
Got my e-mail and sent my money
.
Thank you.
Engman
Jan 16 2011, 08:35 AM
PM's have been sent to all who wanted one with details.
Thanks
Mark
saigon71
Jan 16 2011, 09:11 AM
Funds sent via paypal...914world username in the subject line. Thanks!
no1uno
Jan 16 2011, 09:27 AM
I haven't received the pm/email yet. Please resend. Thanks!
Mike Bellis
Jan 16 2011, 02:08 PM
Done, done and done
gopack
Jan 16 2011, 04:03 PM
QUOTE(kg6dxn @ Jan 16 2011, 12:08 PM)
Done, done and done
maf914
Jan 16 2011, 04:09 PM
Jim and Mark,
Thank you both for offering this. Paypal sent!
JRust
Jan 16 2011, 04:17 PM
Paypal sent
914itis
Jan 16 2011, 05:57 PM
natebg
Jan 17 2011, 02:56 PM
Paypal sent. username in the notes section.
QUOTE(Engman @ Jan 16 2011, 09:35 AM)
PM's have been sent to all who wanted one with details.
Thanks
Mark
no1uno
Jan 17 2011, 04:53 PM
Paypal sent. Thanks
KELTY360
Jan 17 2011, 05:10 PM
QUOTE(gopack @ Jan 16 2011, 02:03 PM)
QUOTE(kg6dxn @ Jan 16 2011, 12:08 PM)
Done, done and done
+1
Greenguy
Jan 19 2011, 12:54 AM
Pay Pal sent user name in remarks section.....thanks
Charles97
Jan 19 2011, 01:53 AM
Iam in if its not to late. Let me know where to send the payment Thanks
Charles
matthepcat
Jan 20 2011, 07:21 PM
Payment sent. When do we expect to get an ETA for the fuse panels?
guylabr
Jan 21 2011, 11:24 AM
Hello, You can add me too. Just let me know how I have to pay. paypall.
guylabr@videotron.ca from Quebec city Canada. G1Y 1L8
Thank you!
Chris H.
Jan 21 2011, 12:00 PM
Paypal sent last week. Can't wait to get this! Thanks again guys for putting this together.
bozo914
Jan 21 2011, 02:38 PM
Paypal sent the 18th, username in comments section
Chris H.
Feb 16 2011, 03:52 PM
Got mine today. The quality is incredible. Looks like an OEM part. Thanks again Jim and Mark for the group buy price.
Can't wait to install it.
Cairo94507
Feb 16 2011, 04:42 PM
I got notice my fuse panel is in transit. YIPEE
Engman
Feb 17 2011, 05:09 PM
All of these have been shipped!
I do have a couple of drop outs so there are a few available.
Email or pm me.
Mark
Mike Bellis
Feb 17 2011, 05:17 PM
I got mine and it's totally awesome!
leebenedi
Feb 18 2011, 02:19 AM
Hi Mark. Has mine been sent yet?
Disregard please. I just got an e-mail saying it is on the way
jeeperjohn56
Feb 18 2011, 02:21 AM
Mark , I got my fuse panel yesterday, looks great thanks again for the group buy.John
rfuerst911sc
Feb 18 2011, 08:55 AM
Were these shipped UPS, FED EX or USPS ? Just wondering where I should be looking for it to arrive. Thanks
Engman
Feb 18 2011, 11:38 AM
QUOTE(rfuerst911sc @ Feb 18 2011, 09:55 AM)
Were these shipped UPS, FED EX or USPS ? Just wondering where I should be looking for it to arrive. Thanks
Shipped via USPS prioity mail and international USPS prioity mail.
And yes I still have a few.
Mark
Niklas
Feb 18 2011, 11:42 AM
Hi Mark!
Can you send two to sweden ?
What is total with freight ?
Paypal ?
Niklas
Gene
Feb 18 2011, 06:49 PM
If you still have one of the panels available I'd be happy to purchase one
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.