Help - Search - Members - Calendar
Full Version: Weber Carb Problem (IDA-3C)
914World.com > The 914 Forums > 914World Garage
Lawrence
Got a problem. I pulled both carbs apart, cleaned and reassembled. They were dirty on the exterior, and pretty clean on the inside.

I think I was pretty thorough, and blew carb cleaner through all the passages.

Now, on the left (driver) side carb doesn't seem to feed fuel through the accelerator pump jets. Could I have assembled something wrong?

Advice?

-Rusty
Lawrence
Not sure what the problem was... but I fixed it.

I pulled the carb from the engine, and I took the pump apart with my eyes closed (so I wouldn't see how the pieces were in there). Then, I reassembled according to the diagram.

I must have had something loaded inside backwards. I should probably replace those rubber diaphrams soon. They're only two years old, but looked pretty ragged.

-Rusty clap56.gif
Mark Henry
Bet you put the spring on the wrong side or the cam upside down or sump-tin stew-ped like that.

I don't know how many times I've put something together and said "DOH!!!!" wacko.gif

Least ya fingered it out! aktion035.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.