the pistons seem to be measuring 95.4x mm

price dropped to $200 based on this sale at club.

http://www.914club.com/bbs2/index.php?showtopic=236607

jim

ATTENTION - I JUST NOTICED IN ONE OF MY PICS A CRACKED TOP FIN ON ONE OF THE CYLINDERS <<

What are you measuring to?

95.XXmm?

If they ARE 95mm (or 95.xx) i would be interested...

Is the missing fin going to create heat issues?? The replies to Garage thread are incouraging.


EDIT.....
Now to find out what you really have....The numbers on the box give indication of below..
VW9400T4 021-198-200 94x71mm 2000cc Dish Top

They obviously are not dish tops and you a diffently measuring 95 in the pic...Hummm

see pics above and below.

pin

please buy a battery for your calipers, sir...so we can define .XX (95.XX)
wrist pins are 24mm

Hey Jim,

I kinda would need to know exact since they are larger than 95 it seems.
95.20mm would be the max. that would be legal...

Ken

pic

i had a battery with some life left in it.

95.44

price dropped to $150

could we see a profile photo of a piston so I can see wrist pin height? this will tell us whAT STROKE they are made for

piston profile

Hello

For reference Pistons are measured @ the gauge point, about .500" from the bottom of the skirt.

http://www.jepistons.com/PDFs/TechCorner/S..._instrc4032.pdf