So a few folks had asked about piecing out the late 2.0L kit I have available,
but rather than do that I have a bunch of other components Ill offer separately.

Brain for a 74 2.0L? $60

TB for a 73 2.0L SOLD

2.0L Intake runners (any yr) $40

Plenum 73-74 2.0L SOLD

Plenum 75-76 2.0L $50

wiring Loom for a 1.7L SOLD

Oil Fill Tower w/PVC (73-74 DJet) SOLD

Flashback valve (73-74 DJet) SOLD


MPS for a 73 1.7L $150
Click to view attachment
Click to view attachment

Distributor (w/trigger points) for a 73 1.7L $100
Click to view attachment
Click to view attachment

Fuel Pressure Regulator (any Djet) $25
Click to view attachment

Stacked elbow connector & connector 2.0L SOLD
Click to view attachment

Thermotime sensor 75-76 2.0L $30
Click to view attachment

Auxiliary Air Regulator (Djet) $75
Click to view attachment

Injectors 2.0L $20 per used, $50 per refurbished
(Witchhunter Performance is my neighbor)
Click to view attachment

Djet Brain Bracket SOLD
Click to view attachment

Cold Start Injector $25
Click to view attachment

EGR mount (late 1.8 & 2.0L) $15
Click to view attachment

Air injection spider pipe $30
Click to view attachment

Injector clamps $9.14
Click to view attachment

Throttle Body gasket $9.14
Click to view attachment

1.8L TB w/TPS $50
Click to view attachment
Click to view attachment

L-Jet Air Horn SOLD
Click to view attachment

Fuel Rails (All) $15 pair
Click to view attachment

L-Jet Cold start injector $20
Click to view attachment

L-Jet Fuel Pressure Regulator $35
Click to view attachment

1.8L Plenum SOLD
Click to view attachment

1.8L ECU $60
Click to view attachment
Click to view attachment

2.0L TPS (all yrs) $30
Click to view attachment

1.8L FI harness $60
Click to view attachment

1.8 AFM $60
Click to view attachment

EGR valve (late) $40
Click to view attachment

EGR piping 2 (late) $15
Click to view attachment

EGR piping 2 (late) $15
Click to view attachment

Fuel Tank Fittings $30
Click to view attachment



Theres more as well...

PM sent on 74 brain

air Plenum and the Throttle body.. 76244 zip

PM sent on the air box and throttle body

Pm on its way Rich.

Hello... Yes/no/piss off, anything?

I'll take the 1.7 wire loom. Thanks, mark

Sorry busy week, Pm'ed

Updated!

~

Items added

I will take the stacked elbow connector - PM your PayPal address and I will make payment today - thanks

Brian

I will also take the D-Jet brain bracket if it is still available - thank you - PM me with total and shipping

Mr. Hotlanta (and any one else for which this applies)

You do not have to continue quoting the same post that has a gajillion pictures in it. A simple "Reply" or "Fast Reply" works fine and will not quote the entire post, pictures and all. In a classified ad, I think everyone knows what you're referring to without re-quoting the same stuff over and over again. Ordinarily it's not a problem, except when the reply your quoting has lots of pics in it. Then the pics are just repeated throughout the entire thread and it becomes very hard to read. I trimmed the ones that were in this thread already. Thanks. Back to your regularly scheduled chaos.

Thanks Gint!

PM sent on Stacked elbow connector 2.0L

Is the 1.8 harness a 6 pin AFM or 7 pin? This would be the second largest black connector. In the picture you posted, it is overlapping the brain connector.

I'm interested in it if it is 6pin.

Mike did I ever get back to you on this?

Free

Looking for a Fan, No broken fins? LMK

You sure did! Got the harness, it was in great shape, just as described.

I tested all the leads against Bowlsby's diagrams and it all checks out! Thanks again!

What's the P/N on the TPS?

Not sure, off a 74 2.0L

I'll have the 2.0 stacked elbow and the 2.0 TPS
Lemme know your paypal so I can send your money back

Gotta get rid o' some stuff ...
If you dont see what your after ask

What's the Bosch part number on the CSV? Do you know if it works?

"Brain for a 74 2.0L?"

Rich, do you still have this ECU? Whats the PN...are you not sure what year it is for?

Jeff, I've led you down the garden path. I didn't realize this thread was a year and a half old when I posted on it. Sorry

Rich is still alive and well...he may still have these parts.

Thanks Jeff. Still alive & still have a too many parts hanging around, (BTW shoot me a PM am ready for that replacement harness) I just havent had much time to hang out here in "play land"


Yup tested & works, off of a 73-74 2.OL

Thanks, I'll take it. PM me your payment info.

Rich, haven't gotten the PayPal payment info yet. No pressure.

Hey Rich, I'll take the 2.0 TPS if still available. I'll send PM.