watsonrx13
Jan 9 2005, 05:41 PM
Well, this the weekend I've been waiting for for over 6 months, putting paint back on the car. I put plastic sheet on the exposed walls of the carport to creat a paint booth. I then taped up the car's exterior panels, except the front trunk and front fenders.
Just to get everyone up to speed, I have stripped the paint from the engine compartment, after replacing the right suspension ear and the engine shelf on that side. I also removed the back pad and glue. I then removed the tar from the passenger compartment floor, the glue behind the back pad, then the seam-sealer and all of the paint. Finally, I removed the seam-sealer and all of the paint from the rear trunk.
Here's a shot of the outside, before painting.
1 of 7
watsonrx13
Jan 9 2005, 05:41 PM
Here's the rear trunk and engine compartment before painting.
2 of 7
watsonrx13
Jan 9 2005, 05:42 PM
Here's the passenger compartment. I bought some wiring looms to wrap around the wires to keep them from being painted and to help hold them out of the way.
3 of 7
watsonrx13
Jan 9 2005, 05:42 PM
Here's a shot after the etch primer, then the next 2 coats of primer had been applied.
4 of 7
watsonrx13
Jan 9 2005, 05:43 PM
Here's a shot of the passenger compartment.
5 of 7
watsonrx13
Jan 9 2005, 05:43 PM
Here's the 'money' shot, we have RED paint. I applied 2 coats of color paint. I took me 2 days from start to finish.
6 of 7
watsonrx13
Jan 9 2005, 05:43 PM
Here's a shot of the passenger compartment.
7 of 7
URY914
Jan 9 2005, 05:47 PM
Rob,
You are the MAN!
You're doing mine when I get done.
Paul
watsonrx13
Jan 9 2005, 05:54 PM
QUOTE (URY914 @ Jan 9 2005, 06:47 PM) |
Rob,
You are the MAN!
You're doing mine when I get done.
Paul |
Yea, but are you going to have anything left to paint?????????
I want to come by next weekend to get a pic and some measurements for your roll-around engine stand, my brother-in-law is going to build one for me. I need it before I pick up the engine from Joe at the end of the month....
I also want to see the last of the 914...
Less is FASTER.... and so is RED.......
URY914
Jan 9 2005, 05:56 PM
PM'd ya Rob
seanery
Jan 9 2005, 06:31 PM
looks great Rob!
Lou W
Jan 9 2005, 06:50 PM
Very Nice job
Allan
Jan 9 2005, 07:07 PM
That is way too cool!!! You are gonna have one really nice car.
Jeroen
Jan 9 2005, 07:09 PM
very nice!
have yourself a
for a job well done
watsonrx13
Jan 9 2005, 07:13 PM
QUOTE (Jeroen @ Jan 9 2005, 08:09 PM) |
very nice! have yourself a :beer1: for a job well done |
Jeroen, I'm enjoying a martuni now...
I refuse to come down with DWD, I'm going to complete this project and get it back on the road by my birthday in June...
Joe Ricard
Jan 9 2005, 08:13 PM
And he's got a SWEEEEET engine ready to go in.
POR-15 Black engine enamel will look great against the red.
J P Stein
Jan 9 2005, 08:19 PM
Nice....ya wanna swing by & do mine?
type47fan
Jan 9 2005, 08:23 PM
Makes us all feel good to see the various 914s on the board coming back to life! Keep 'em rollin'!
xsboost90
Jan 9 2005, 09:03 PM
good job! i wish i had enough patience to strip all mine down to bare metal, but im more of a smooth it out and fix the rust kinda guy.
gaz914
Jan 9 2005, 09:10 PM
QUOTE (Jeroen @ Jan 9 2005, 05:09 PM) |
very nice! have yourself a for a job well done |
72914S
Jan 10 2005, 07:07 AM
What color red is that? what brand of paint? just wondern`. Barry
"Red looks fast just sitting there"
Gint
Jan 10 2005, 08:20 AM
Nice goin Rob! Lookin good.
watsonrx13
Jan 10 2005, 12:01 PM
QUOTE (72914S @ Jan 10 2005, 08:07 AM) |
What color red is that? what brand of paint? just wondern`. Barry
"Red looks fast just sitting there" |
First off, thanks to everyone for their positive comments.
Unless you have done any repair/prep/painting of the interior sections, you can't imagine the amount of time involved. All of this was done using a suction, quart-size spray gun, WITHOUT a rotissorie.
Barry, this is the original Bahia Red, L30E. I used the Omni paint products...
URY914
Jan 10 2005, 12:03 PM
Rob, where did you get the paint?
Root_Werks
Jan 10 2005, 12:28 PM
Painted inurds
brant
Jan 10 2005, 01:24 PM
GOOD JOB Rob,
dang that is a ton of work..
great results thou
watsonrx13
Jan 10 2005, 06:25 PM
Here's the most significant before and after shot. I completely replaced the pass side suspension ear and the battery tray.
Here's the before shot
watsonrx13
Jan 10 2005, 06:26 PM
Here's the after shot.
Man I do good work...
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.