I recently purchased a set of 1974 911 boge struts. Need to buy front hubs with lugs and backing plate.

Also anybody have rear 5x130 drilled 914-4 rotors? need those too.

Thanks.

I have a pair of brand new 5-lug rear rotors from PMB that I won't be using since I decided to stay with ATS Classics 4-lug wheels.

$150. shipped (CONUS)

Good price on the rotors but be aware that the true 914-6 rotors have the two screw holes for in a different location then the 914 rotors. If they are redrilled 914 rotors the holes line up.

I do have a pair of 911 backing plates that were powder coated satin black. I think the cut out is for m calipers. If you are running S or A calipers they would need to be trimmed.
Asking $50 for the pair shipped.

are these originally 914-4 rotors that were drilled? I will be running redrilled 4 lug hubs in the rear.

Yes.

Still looking for these if anyone can help.

I have a pair of fronts with lugs that you can have for shipping cost. Basically
they came off my -6 when I was trying to fix another issue and I noticed after
cleaning that the anodizing in some of the recessed areas is coming off and
starting to get pitting. They will work fine but at some point need to be
protected from more corrosion. PM me for photos if interested.

I don't think the hubs from a 6 will fit the 74 struts he has. Yours fit on 16 mm spindles and you ones he needs for on 18 mm spindles.

I'm fairly sure that all the 911 struts of that time window are the same in the
bearing taper area. Will try to double-check later.

I have a pair front hubs from a 73' 911 available

Alapone...
sent you a pm but just noticed in your post the struts you have are from a 74'....
what I have are two hubs from 74-89' 911 part no 911.341.605.4R
I also have the bearings and stock 45mm studs
$80 for all shipped USA48

Thanks...john

Click to view attachment Click to view attachmentClick to view attachment

I was able to get a set of these thanks for the help guys.

John. I'm interested if still available

So did the rear rotors meet your expectations, Andrew?

(inquiring minds ...)