hi Everyone..
First Thanks to all that I purchased parts from..My 76 912E is back on the road runnin good..
What I need is the Vacuumn Advance / Retard unit that mounts on the distributer.
The diaphragm in mine is bad..I can manually put vacummn on it and I can feel it bubble and fail..
Makin settin idle near impossible..lol..
New or used..It doesn't matter as long as it works..
Ay Ideas Or Places I can look for it??..Not havin any luck locally..
FYI 2.0 calif car with stock bosch dist..
Oh I forgot to add that mine is fuel injected
Thanks
Jay Hilgers
Here is my e-mail again just in case
jayhilgers@att.net
Full Version: Advance / Retard Vacuumn unit
QUOTE(jayhilgers @ Sep 3 2014, 08:01 AM) 
hi Everyone..
First Thanks to all that I purchased parts from..My 76 912E is back on the road runnin good..
What I need is the Vacuumn Advance / Retard unit that mounts on the distributer.
The diaphragm in mine is bad..I can manually put vacummn on it and I can feel it bubble and fail..
Makin settin idle near impossible..lol..
New or used..It doesn't matter as long as it works..
Ay Ideas Or Places I can look for it??..Not havin any luck locally..
FYI 2.0 calif car with stock bosch dist..
Thanks
Jay Hilgers
Here is my e-mail again just in case
jayhilgers@att.net
I am not sure which vacuum unit will fit that 912e distributor. I found that the l jet units in 1.8 engines have a different hole pattern than the d jet units. The l jet have a staggered pattern and d jet have two in line holes.
QUOTE(bdstone914 @ Sep 3 2014, 08:13 AM)
QUOTE(jayhilgers @ Sep 3 2014, 08:01 AM)
hi Everyone..
First Thanks to all that I purchased parts from..My 76 912E is back on the road runnin good..
What I need is the Vacuumn Advance / Retard unit that mounts on the distributer.
The diaphragm in mine is bad..I can manually put vacummn on it and I can feel it bubble and fail..
Makin settin idle near impossible..lol..
New or used..It doesn't matter as long as it works..
Ay Ideas Or Places I can look for it??..Not havin any luck locally..
FYI 2.0 calif car with stock bosch dist..
Thanks
Jay Hilgers
Here is my e-mail again just in case
jayhilgers@att.net
I am not sure which vacuum unit will fit that 912e distributor. I found that the l jet units in 1.8 engines have a different hole pattern than the d jet units. The l jet have a staggered pattern and d jet have two in line holes.
Thanks..I'm not sure either bings my car is fuel injected
Jay
QUOTE(jayhilgers @ Sep 3 2014, 08:38 AM)
QUOTE(bdstone914 @ Sep 3 2014, 08:13 AM)
QUOTE(jayhilgers @ Sep 3 2014, 08:01 AM)
hi Everyone..
First Thanks to all that I purchased parts from..My 76 912E is back on the road runnin good..
What I need is the Vacuumn Advance / Retard unit that mounts on the distributer.
The diaphragm in mine is bad..I can manually put vacummn on it and I can feel it bubble and fail..
Makin settin idle near impossible..lol..
New or used..It doesn't matter as long as it works..
Ay Ideas Or Places I can look for it??..Not havin any luck locally..
FYI 2.0 calif car with stock bosch dist..
Thanks
Jay Hilgers
Here is my e-mail again just in case
jayhilgers@att.net
I am not sure which vacuum unit will fit that 912e distributor. I found that the l jet units in 1.8 engines have a different hole pattern than the d jet units. The l jet have a staggered pattern and d jet have two in line holes.
Thanks..I'm not sure either bings my car is fuel injected
Jay
Check the part number on the distributor.
QUOTE(bdstone914 @ Sep 3 2014, 02:40 PM)
QUOTE(jayhilgers @ Sep 3 2014, 08:38 AM)
QUOTE(bdstone914 @ Sep 3 2014, 08:13 AM)
QUOTE(jayhilgers @ Sep 3 2014, 08:01 AM)
hi Everyone..
First Thanks to all that I purchased parts from..My 76 912E is back on the road runnin good..
What I need is the Vacuumn Advance / Retard unit that mounts on the distributer.
The diaphragm in mine is bad..I can manually put vacummn on it and I can feel it bubble and fail..
Makin settin idle near impossible..lol..
New or used..It doesn't matter as long as it works..
Ay Ideas Or Places I can look for it??..Not havin any luck locally..
FYI 2.0 calif car with stock bosch dist..
Thanks
Jay Hilgers
Bosch part # for distributer is 923 602 021 00
Vacuum unit part # is 923 602 924 00
Thanks Jay
Here is my e-mail again just in case
jayhilgers@att.net
I am not sure which vacuum unit will fit that 912e distributor. I found that the l jet units in 1.8 engines have a different hole pattern than the d jet units. The l jet have a staggered pattern and d jet have two in line holes.
Thanks..I'm not sure either bings my car is fuel injected
Jay
Check the part number on the distributor.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.