Harpo
Oct 18 2014, 12:03 PM
Bob has started to ship the units priority mail. You will receive the tracking number once it is boxed up. The first 30 units should be shipped by Monday.
Thanks for your patience
David
TJB/914
Oct 20 2014, 11:11 AM
David.
I just received my 914 dip stick gauge & thanks for everything.
Looks good, haven't installed it yet, but assume it fits the hole??
I am a little surprised about the dial size, I was thinking it would be larger. No problem, I just need to put my glasses on.
Tom
DRPHIL914
Oct 20 2014, 11:46 AM
finally processed the payment, i tried from my phone over the weekend but was having network issues i believe.hopefully my payment was accepted in time to still be out in t hte first group. ( i was signed up around #25 or so) - not an emeergency but looking forward to getting int just the same.
type47
Oct 20 2014, 02:42 PM
Received mine today. THANKS!
Harpo
Oct 20 2014, 02:47 PM
USPS tracking claimed I would receive mine today but it doesn't look very promising
David
pilothyer
Oct 20 2014, 03:17 PM
I should be getting mine by Wednesday according to USPS tracking.
Harpo
Oct 21 2014, 03:48 PM
pilothyer
Oct 21 2014, 03:55 PM
Looks so nice David..........Can't wait to get mine.
TJB/914
Oct 21 2014, 04:43 PM
QUOTE(Harpo @ Oct 21 2014, 05:48 PM)
Hi David,
Interesting, my needle is parking in the same location. I was wondering if it was a defect. Ok, now it's normal & same as yours.
Really great purchase.
Thanks,
Tom
eric9144
Oct 21 2014, 04:43 PM
...so second run?
malcolm2
Oct 21 2014, 04:45 PM
QUOTE(pilothyer @ Oct 20 2014, 04:17 PM)
I should be getting mine by Wednesday according to USPS tracking.
Me too
Harpo
Oct 21 2014, 05:52 PM
QUOTE(Harpo @ Oct 16 2014, 04:30 PM)
PM 's have been sent to the participants of the first run. I will give everyone a week to order. Because I anticipate that some people will change their mind and not order I will send payment instructions to those next in line. As far as a second or third run Bob has not yet committed.
Thanks
David
I will get a final count and notify the next people in line tomorrow. I will also inquire about a second run.
DAvid
GregAmy
Oct 22 2014, 06:50 AM
QUOTE(eric9144 @ Oct 21 2014, 06:43 PM)
...so second run?
Sounds like he needs to be thinking about maybe a third run, too.
GA, who tossed hit hat into the ring via PM some time ago...
tumamilhem
Oct 22 2014, 07:18 AM
Just to recap since it was a while ago, I'm in.
DRPHIL914
Oct 22 2014, 07:50 AM
QUOTE(Harpo @ Oct 21 2014, 07:52 PM)
QUOTE(Harpo @ Oct 16 2014, 04:30 PM)
PM 's have been sent to the participants of the first run. I will give everyone a week to order. Because I anticipate that some people will change their mind and not order I will send payment instructions to those next in line. As far as a second or third run Bob has not yet committed.
Thanks
David
I will get a final count and notify the next people in line tomorrow. I will also inquire about a second run.
DAvid
FYI - i paid online- monday- ( was in the first fifty) but have not heard back on item ship date-
EDIT- just found my e-mail this morning with tracking-looks like i should get mine sometime tomorrow
no1uno
Oct 22 2014, 11:59 AM
QUOTE
Hi David,
Interesting, my needle is parking in the same location. I was wondering if it was a defect. Ok, now it's normal & same as yours.
Really great purchase.
Thanks,
Tom
I believe it would park at ambient temperature unless engine is at temperature from use.
Dr Evil
Oct 22 2014, 12:51 PM
Got mine today. My only complaint is that it does not measure low enough to show actual temp during winter.....
Harpo
Oct 22 2014, 03:19 PM
I just sent a PM to a few more members with the payment instruction for the dip stick temperature gauges because a few of the members never ordered theirs.
It looks very favorable that there will be a second run
David
02loftsmoor
Oct 22 2014, 03:29 PM
QUOTE(Harpo @ Sep 29 2014, 04:32 PM)
I have always wanted one of these but when I contacted Mainely by design he had no more and was not sure if he was going to even make any more. I have gotten enough interest that he is willing to make another run of 50. Originally he told me that I needed to get 24 members to commit. Well I now have 33 members who have expressed interest.
The current price is 49.95 and after the group buy the price will be going up.
Bob is about 3 weeks before all of his subcomponents will arrive and he can start building the parts for us. Please hold tight once he is ready to ship I will post payment instructions.
Harpo (2)
Brant (1)
Zimms (1)
Pancake Porsche (1)
Kansas914 (1)
02loftsmore (1)
dw914si
Mapguy (2)
type47 (1)
pilother (3)
sa914 (1)
TJB914 (1)
philipw (1)
dangrouche (1)
stophos (1)
malcomb2 (1)
drbill (1)
cary (2)
larmo63 (1)
mintyish (1)
amphicar (1)
markl (1)
nbscooters (1)
angerosa (1)
lonewolf (1)
no1uno (1)
potterporsche (1)
4x4loyr (1)
sprovost (1)
bob (1)
narino (1)
Dr Evil (1)
Big Len (1)
jb620 (1)
dlkawashima (1)
Beat Navy (1)
olsib914 (1)
flippa (1)
914four (1)
firstcar (1)
prollma (1)
2ma2 (2)
maf914 (1)
That is 50
If I have missed anyone please let me know
Thanks for your interest
David
mine came today,, goods good
pilothyer
Oct 22 2014, 04:01 PM
My 3 came today, very nice
Zimms
Oct 23 2014, 05:49 PM
Got mine today. Thanks for setting this up!
bigkensteele
Oct 23 2014, 07:00 PM
I am in for one if there is a second run.
Thanks,
Ken
drbill
Oct 23 2014, 08:46 PM
Got mine today. Thanks, David.
narino
Oct 23 2014, 09:21 PM
Received mine yesterday.
Thank you!
j
mapguy
Oct 24 2014, 12:08 AM
Mine came yesterday. Thanks for organizing this!
narino
Oct 25 2014, 03:10 PM
I don't think it's an issue, but thought I'd check.
My Mainely gauge sits a bit loose in the dip stick holder. Is this an issue? Sorry if that's a dumb question. I'm so used to using force to push in or pull out the old dipstick that this one seemed odd. It falls right in, no "pinch" when it's all the way in. It has very little play at the bottom of the stick, from what I can tell. But at the top where the dip stick tube flares out there is about 1/8" play.
Thoughts?
j
pilothyer
Oct 25 2014, 03:45 PM
I have 3 of these that I just received, and with all of them the rubber seal slips over the dip stick tube for a perfect fit and seal.
narino
Oct 25 2014, 07:52 PM
I was not aware there was a rubber seal for the dipstick.
I guess that solves that. Now hopefully this part is not NLA.
pilothyer
Oct 25 2014, 09:44 PM
Did yours not come with the rubber sleeve at the top ????
dlkawashima
Oct 25 2014, 10:09 PM
If I understand what Jorge is saying, he did not realize there was a rubber sleeve at the top of the dipstick. That sleeve is tight and you need some force to get it to seat correctly.
narino
Oct 27 2014, 12:03 PM
Jerry - Thanks for that last bit of info I needed to figure out what I was missing. I guess mine accidentally got shipped without the rubber sleeve.
I just talked to Bob at Mainely, what a great guy. He's putting one in the mail for me.
Big Len
Oct 27 2014, 12:33 PM
Got mine, but I have to say, the gauge is pretty small, exactly the same size as a quarter. My poultry thermometer is bigger.
Not sure if I could read this without reading glasses. Yeah, I'm an old F&#k.
BeatNavy
Oct 27 2014, 12:54 PM
QUOTE(Big Len @ Oct 27 2014, 02:33 PM)
Got mine, but I have to say, the gauge is pretty small, exactly the same size as a quarter. My poultry thermometer is bigger.
Not sure if I could read this without reading glasses. Yeah, I'm an old F&#k.
Yeah, but let's face it, if your poultry runs hot it could be a ruined Thanksgiving, and cranky family members. Now THAT's a disaster.
It's not a huge gauge, and I didn't think I'm that old, but apparently I am as I also need my glasses to read it. BUT...it's good to have it so I can check the temp if I want to!
I need to see if I have that rubber sleeve thing as well, as I didn't feel like it sat in the tube particularly well either.
Big Len
Oct 27 2014, 05:09 PM
Rob - I'd rather toast the roast.
arcadeforever
Oct 27 2014, 09:01 PM
QUOTE(bigkensteele @ Oct 23 2014, 09:00 PM)
I am in for one if there is a second run.
Thanks,
Ken
me too!!!!
malcolm2
Nov 4 2014, 06:12 PM
For Sale: Hey, I got one and it works fine, but I have changed my mind..... I do not want to use it. I paid $59.94 with shipping.
If you are willing to buy it, that is what I would like to get. I saved the mailer and the paperwork inside, you get that too.
Clark
tumamilhem
Nov 4 2014, 06:19 PM
QUOTE(02loftsmoor @ Oct 22 2014, 05:29 PM)
QUOTE(Harpo @ Sep 29 2014, 04:32 PM)
I have always wanted one of these but when I contacted Mainely by design he had no more and was not sure if he was going to even make any more. I have gotten enough interest that he is willing to make another run of 50. Originally he told me that I needed to get 24 members to commit. Well I now have 33 members who have expressed interest.
The current price is 49.95 and after the group buy the price will be going up.
Bob is about 3 weeks before all of his subcomponents will arrive and he can start building the parts for us. Please hold tight once he is ready to ship I will post payment instructions.
Harpo (2)
Brant (1)
Zimms (1)
Pancake Porsche (1)
Kansas914 (1)
02loftsmore (1)
dw914si
Mapguy (2)
type47 (1)
pilother (3)
sa914 (1)
TJB914 (1)
philipw (1)
dangrouche (1)
stophos (1)
malcomb2 (1)
drbill (1)
cary (2)
larmo63 (1)
mintyish (1)
amphicar (1)
markl (1)
nbscooters (1)
angerosa (1)
lonewolf (1)
no1uno (1)
potterporsche (1)
4x4loyr (1)
sprovost (1)
bob (1)
narino (1)
Dr Evil (1)
Big Len (1)
jb620 (1)
dlkawashima (1)
Beat Navy (1)
olsib914 (1)
flippa (1)
914four (1)
firstcar (1)
prollma (1)
2ma2 (2)
maf914 (1)
That is 50
If I have missed anyone please let me know
Thanks for your interest
David
mine came today,, goods good
Yes, you missed me. I was in back in September.
Harpo
Nov 5 2014, 07:24 PM
Bob is going to do another run of 50. He has ordered the parts and once they come in I will send instructions. I only have 36 names so everyone should get one this time around.
I will post those names tomorrow
Thanks again
David
eric9144
Nov 5 2014, 09:41 PM
Cool, thanks David
AfricanHijinx
Nov 6 2014, 08:39 AM
got mine thanks
clapeza
Nov 6 2014, 09:42 AM
David,
Add me to the list. I'll take one.
Chester
pisces914
Nov 13 2014, 10:38 PM
love to get one too - can complete transaction immediately - just let me know - don't see any 914 ones on the mainely website - have one for my 356, and it's great - thanks, brad in seattle
Harpo
Nov 16 2014, 10:16 AM
Second run
tumamilhem
aharder
buddyv
elliotcannon
grelber
karman
nozzle
benandralph
mdelwiche
mtsur
orthobiz
fourblades
axle
veltror
architect
mine9three
nihil44
sb914
johnathanlivesay
eric9144
jawaporsche
gregamy
brembry
kid914
914-300hemi
white1975
warrenoliver
dale73914
ww914
daiberl
porschef
curt
hotshoe914
jett
Valy
old914dog
rockey
bigkensteele
arcadeforever
clapeza
pisces914
41 members that have expressed interest in round 2
Thanks
DAvid
Ben and Ralph
Nov 16 2014, 10:20 AM
QUOTE(Harpo @ Nov 16 2014, 08:16 AM)
Second run
tumamilhem
aharder
buddyv
elliotcannon
grelber
karman
nozzle
benandralph
mdelwiche
mtsur
orthobiz
fourblades
axle
veltror
architect
mine9three
nihil44
sb914
johnathanlivesay
eric9144
jawaporsche
gregamy
brembry
kid914
914-300hemi
white1975
warrenoliver
dale73914
ww914
daiberl
porschef
curt
hotshoe914
jett
0396
old914dog
rockey
Awesome, thanks for putting this together.
Valy
Nov 16 2014, 05:15 PM
I want one too, I think I'm among the first ones to ask. Somehow, I'm not on the list.
QUOTE(Harpo @ Nov 16 2014, 09:16 AM)
Second run
tumamilhem
aharder
buddyv
elliotcannon
grelber
karman
nozzle
benandralph
mdelwiche
mtsur
orthobiz
fourblades
axle
veltror
architect
mine9three
nihil44
sb914
johnathanlivesay
eric9144
jawaporsche
gregamy
brembry
kid914
914-300hemi
white1975
warrenoliver
dale73914
ww914
daiberl
porschef
curt
hotshoe914
jett
0396
old914dog
rockey
bigkensteele
arcadeforever
clapeza
pisces914
41 members that have expressed interest in round 2
Thanks
DAvid
0396
Nov 16 2014, 06:05 PM
QUOTE(Harpo @ Nov 16 2014, 08:16 AM)
Second run
tumamilhem
aharder
buddyv
elliotcannon
grelber
karman
nozzle
benandralph
mdelwiche
mtsur
orthobiz
fourblades
axle
veltror
architect
mine9three
nihil44
sb914
johnathanlivesay
eric9144
jawaporsche
gregamy
brembry
kid914
914-300hemi
white1975
warrenoliver
dale73914
ww914
daiberl
porschef
curt
hotshoe914
jett
0396
old914dog
rockey
bigkensteele
arcadeforever
clapeza
pisces914
41 members that have expressed interest in round 2
Thanks
DAvid
David, please remove me from this list as I picked one up via the F/S forum.
Thanks
porschefile2010
Nov 16 2014, 08:50 PM
I would like to be included for one of these. It could be shipped to my son who lives in Tiburon CA. Thanks
GregAmy
Nov 16 2014, 08:52 PM
QUOTE(Harpo @ Nov 16 2014, 12:16 PM)
Second run
Is this a done deal, request for payment? If so, care to re-post how to pay out?
Harpo
Nov 20 2014, 06:00 PM
Good evening everyone
Ordering is open and I have sent instructions to those of you in round two. I have tried very hard not to miss anyone.
Once again thanks for your patience
David
9won4
Nov 20 2014, 09:53 PM
If ordering is still open...I'd like one...Thanks!!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.