Wheels: SOLD

Hi Jeff,
On 10/29 you said the wheels might ship on the 30th.
It's a week past the 30th.
Can you provide an update?

Sorry for the delay in responding but was out of town last week at SEMA, anyway your wheels also shipped last week so if you don't already have them you will soon.

I'm interested in the seat rails. Sending PM.

Interested in the front sway bar

Price for:
1. Fresh air box with fan
2. Heater controls
3. Roll bar padding

Thanks

Dunc

Do you have a headlight switch ? How much shipped to 35603 ? I tried email but it bounced back...................Jerry

1. Fresh air box with fan - Just sold
2. Heater controls - Rusted out
3. Roll bar padding- Cracked

I have a switch but not sure i want to part with it

I would like the seats and seat back and the rails if Napasteve does not take them.

I also need the triangular piece next to the right rear jack point (usually rusts our from under the battery tray).

I need the large washer that goes underneath the engine mount. It's about 3" wide and served to keep the engine from shifting too much. Don't know what it's called.

Thanks,

Chris

Seat rails/brackets just arrived as advertised. Thanks Jeff.

How much for the passengers side upper engine tin, with shipping to Los Angeles?

Which one specifically, the one that covers the head / pistons?

bump

Rails no longer needed. jack point no longer needed. Found my washer.

I need the seat backing and seats if available.

How much for carbon canister shipped to riverside Ca?
Thanks

Do you by any chance have the engine lid grill?

I am in need of the letter { c } on the engine grill also the lower sail panel trim for both sides. I also need a front valance.
Thanks Brian

interested in the window channel pieces that hold the fuzzies and squeegees...unless someone else has laid claim already.

I'm working on a custom console and need a tunnel from the floor cross brace forward. I need it intact, in terms of the flange so I can use it to spot weld it back in, as though it was going in as a replacement part.
I'd be happy to take care of the spot welds if you'd be willing to slice out the floor and front section of the body.
Let me know if this is do-able? Thanks,
Chris

Blower box and motor?

Do you still have the front and rear sway bars?

Email sent re: passenger mirror

I am in need of a pair of heater flap boxes.
Thanks,

pm sent for steering box/rack & pinion.

Jack

Looking for the left engine lid trim piece next to the opening hatch mb912e

pm sent...

Do you still have the cylinder heads? If so, are they usable? If yes to both, how much?

jkuehn

I would like the trunk lock and key if possible

thanks johnpierre

email sent...

Is the speedo 150mph and for sale at what price to 92651?

thanks

I'm looking for a couple of the parts listed in the picture below:

1. Link Bearing (#5 in the picture below). Primarily left (driver's) side, but right if you have it as well. I saw those in one of your pictures.

2. Same for plate (#6) below (primarily driver's side)

3. Also could use three hex bolts (# 2) below

Click to view attachment

Sent a pm on the passengers side door.

[quote name='BeatNavy' date='Feb 23 2016, 11:31 AM' post='2306865']
I'm looking for a couple of the parts listed in the picture below:

1. Link Bearing (#5 in the picture below). Primarily left (driver's) side, but right if you have it as well. I saw those in one of your pictures.

2. Same for plate (#6) below (primarily driver's side)

3. Also could use three hex bolts (# 2) below

Click to view attachment
[/quot

If these are not available, try Bruce Stone. He has replated ones . Great vendor too.
Good luck

Hi. Never heard back about this request? Are the parts still available?

I am interested in the steering wheel - new to this posting - if you can contact me at mcheckor@brandwagoninc.com

thank you

Starts when folks ignore established rules.

Holy crap ...

How much does Bruce pay you for all of these posts

I am interested in an outside driver's side door handle. Will send PM.