I need a 3 inch section of tubing from an oil plumbing system.
The nipple I need must be steel and must be straight, not curved
The most likely used source would be from a later 911 system.
Takes a 36mm nut
Please see picture.
Used is fine, but not too rusty or pitted.
TIA
Rory
Don't need the nut.
.....gees the pichers are uge.
Full Version: WTB '6' or 911 oil pipe
QUOTE(rgalla9146 @ Aug 4 2016, 08:52 AM) 
I need a 3 inch section of tubing from an oil plumbing system.
The nipple I need must be steel and must be straight, not curved
The most likely used source would be from a later 911 system.
Takes a 36mm nut
Please see picture.
Used is fine, but not too rusty or pitted.
TIA
Rory
Don't need the nut.
.....gees the pichers are uge.
Might have it.
Warren
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.