These are really hard to find and super light weight three piece Dura-Lite aluminum racing wheels. All four are 15" x 8" but I'll include two outer rings that will give someone the option to go to 15" x 10" on the rears. The original rings are not so shiny but may brighten with some polishing. I recently painted the centers. They currently have 245 x 40 Hoosier A7 tires with about 30 autocross runs on them. Those will be good for probably 70 more.

Dura Lite wheels & used Hoosier A7 $1100 (prefer local pick up)

Wheels only $750 (plus shipping)

PM your interest.

This is a older photo from when I just got those wheels. I'll get some more recent up soon.

Here are present day photos. The first are the two with original outer rings and the second are the two with the recently installed Bogart racing outer rings.

Price reduction...

Dura Lite wheels & used Hoosier A7 $1100 (prefer local pick up)

Wheels only $800 (plus shipping)

Bump.

I may be interested. How much do they weigh in 15x10? What is the backspace on them and how much do the outers cost (to make the other two 15x10)

Sorry I just saw your reply Mike.

I'm not certain on weight but these are the lightest wheels I've owned. Going to the larger outer ring to make 10" wide surely wouldn't add more than a pound or so. I can try and get them on a bathroom scale for you later. I'll also get a backspace measurement.

I had the two shorter outer rings made by Bogart Racing Wheels. That set me up with four 15 x 8 for SCCA Heritage Classic Race. So to get to 15 x 10 you'd put the original taller outer (included in the sale) and get Bogart to make two more. I would prefer you contact them directly for a price so I don't tell you wrong. You'd have to split the wheels (no big deal) and then reseal with silicon when you put them back together (again, no big deal).

I've stripped the Hoosiers to use on a 5-lug set I'm having Bogart make so these are ready to ship. And I've just reduced the price to $750!!!

PM if you're still interested.

No problem. Yes, I am interested. I would like to know the weight of a wheel and how much the outers cost you to have made.

Thanks,

Mike

I'm taking these wheels down to $700. Also, if you're concerned about back-spacing, I've got front and rear hubs with long studs. I've also got wheel spacers so we can come up with a solution to fit your needs These worked on my autocross 914 and can work on yours as well!

Price reduced to $600.