Mikey914
Jun 16 2017, 03:31 PM
QUOTE(Steve @ Jun 16 2017, 11:25 AM)
What about the bumper top spacers? I couldn't find them on the web site
Right here put them on sale too for ya!
http://shop.914rubber.com/Bumper-Top-Rubbe...m?categoryId=-1
ConeDodger
Jun 16 2017, 04:13 PM
Shoot! I lost most of a nights sleep and guess what? Mine are still there.
Elliot Cannon
Jun 16 2017, 04:42 PM
QUOTE(Mikey914 @ Jun 16 2017, 10:35 AM)
QUOTE(Elliot Cannon @ Jun 16 2017, 09:12 AM)
The holes for my ski rack are being used for my bike rack.
Very nice. So were they there before, and if so did they fall apart when removed?
I had to clean the ski rack holes with a tap. (Just a bit of rust). I made the blocks (rather crudely) from some aluminum I had laying around. I got some Yakima bike rack parts to finish it. Here's a pic with the bike on the rack taken at the 2005 WCC. Twelve years and twenty pounds ago.
Mblizzard
Jun 16 2017, 05:22 PM
Order placed!
Larmo63
Jun 16 2017, 05:32 PM
Not too many of these rubber gaskets around.....
Click to view attachmentBy the way, I made Mike D. buy his set of factory ski racks from me a few G & R's ago. I think he is glad he did.
Mikey914
Jun 16 2017, 05:41 PM
QUOTE(Larmo63 @ Jun 16 2017, 04:32 PM)
Not too many of these rubber gaskets around.....
Click to view attachmentBy the way, I made Mike D. buy his set of factory ski racks from me a few G & R's ago. I think he is glad he did.
Make me a template be happy to knock a few out for you thanks Mark
Steve
Jun 16 2017, 06:47 PM
QUOTE(Mikey914 @ Jun 16 2017, 02:31 PM)
QUOTE(Steve @ Jun 16 2017, 11:25 AM)
What about the bumper top spacers? I couldn't find them on the web site
Right here put them on sale too for ya!
http://shop.914rubber.com/Bumper-Top-Rubbe...m?categoryId=-1Thanks Mark!! Order placed!!
arne
Jun 16 2017, 07:12 PM
Oddly enough, my car still has them and they aren't painted over either. Hmm, looks like that might be a good spot to get a paint match from.
Click to view attachment
edge540
Jun 16 2017, 07:54 PM
do you make the rubber "bridge" for the fuel tank strap?
Mikey914
Jun 16 2017, 11:43 PM
Haven't yet completed, but underway.
Mikey914
Jun 17 2017, 12:06 AM
Blake got sidetracked but here is a picture I asked him to take. may need to retake as it's at a weird angle.
brownaar
Jun 17 2017, 10:17 AM
QUOTE(Mikey914 @ Jun 16 2017, 10:06 PM)
Blake got sidetracked but here is a picture I asked him to take. may need to retake as it's at a weird angle.
BEAUTIFUL!!!!!
Mikey914
Jun 17 2017, 10:55 AM
Made these from the same compound factory did. Took a little research, but there is a reason they used what they did. Should last a long time. I understand why the others have had issues with their reproduction of this part. Took a little longer but worth the wait.
brownaar
Jun 20 2017, 05:56 PM
Vacuum stack elbow listed yet? I can't find it.
Mike D.
Jun 21 2017, 05:04 PM
It's got to be better than this piece of crap from AA
This is their brand-new $25 reproduction BTW.
Mikey914
Jun 22 2017, 07:03 AM
Aaaaahhh WTF?????
Yes!
This is the technology we were using 8 years ago. Hand casting in silicone molds. It will make the shape but is limited. There are also techniques you can use to eliminate most of the bubbles, but it does cost a little more and required equipment to do it.
Blake should have these up later this morning. I'm in training and he was off the last 2 days, but yes I'll make sure he gets these up on the site today and post a link (with a few more pictures too).
championgt1
Jun 22 2017, 09:51 AM
QUOTE(Mike D. @ Jun 21 2017, 04:04 PM)
It's got to be better than this piece of crap from AA
This is their brand-new $25 reproduction BTW.
I got one of those too. I keep it as a reminder to never buy anything from them again. What a piece of shit! The fact that you would put that on your shelves and then sell it to someone blows me away.
Mikey yours looks amazing!!
Mikey914
Jun 23 2017, 07:17 AM
Well at least you won't have to buy that anymore.
Mikey914
Jun 23 2017, 11:03 PM
NEW LISTING IS LIVE NOWSale running until the end of the month!
Check it out
here
brownaar
Jun 25 2017, 08:39 AM
QUOTE(Mikey914 @ Jun 23 2017, 09:03 PM)
NEW LISTING IS LIVE NOWSale running until the end of the month!
Check it out
here YOU ARE DA BOMB!
Mikey914
Jun 26 2017, 12:01 AM
Actually thank Blake I've been away in training this last week.
brownaar
Jun 26 2017, 05:29 AM
Thanks, Blake!
Guss I shoulda said-YOU GUYS ARE DA BOMB.
I was just excited about the quality of the product, as usual, and the GB price. I bought three. I only need one.(For now. They do eventually wear out and since I'm keeping my teener forever....)
Mikey914
Jun 26 2017, 07:30 PM
Not a bad idea to stock up on these they will be $20 after the end of the month.
Mikey914
Jun 30 2017, 12:09 AM
Sale about to close !
theer
Jun 30 2017, 10:39 AM
QUOTE(Mikey914 @ Jun 30 2017, 02:09 AM)
Sale about to close !
Did I miss it? Prices on website have changed?
Mikey914
Jun 30 2017, 10:52 AM
QUOTE(theer @ Jun 30 2017, 09:39 AM)
QUOTE(Mikey914 @ Jun 30 2017, 02:09 AM)
Sale about to close !
Did I miss it? Prices on website have changed?
No haven't changed yet - Still $9.14 with the metal for the stacked elbows
http://shop.914rubber.com/Branch-Piece-Air...m?categoryId=-1The ski rack plugs I did need to reset the discount on as it expired a day early, but you are good to go now!
http://shop.914rubber.com/Caps-for-Ski-Rac...m?categoryId=-1
theer
Jun 30 2017, 10:54 AM
No - I meant the others: ski rack plugs and jack strap.
Mikey914
Jun 30 2017, 11:01 AM
theer
Jun 30 2017, 11:07 AM
Woo hoo! Order placed. Thanks, 914Rubber
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.