Just want to make sure I have all this connected correctly

Red from Distributor to Coil +
Black from Distributor to Coil -

Black with Purple (blue connector) to Coil -
Black with Red (red connector) to Coil +

Green wire you see unconnected to Temp sender
White wire you see not connected - not used as running carbs

Click to view attachment

bump

These are the stock wires to the coil and you have them correct.

The others are for an aftermarket ignition module and I don't know if they are correct or not.
It depends on the module and how it is supposed to be wired.
If I had nothing but the wire colors to go by I would wire it like it is.
But I would first try to find out what module I had and research how that module should be wired.

Electrical items are lousy things to guess about.

Jim