Full Version: 914- 6 GT oil line eye candy
Had a set yellow zinc chromated.. Turned out nice and completes the look..Click to view attachment
Pretty! What's the ID and wall thickness of that tube? Any possibility I could run these as water lines...?
QUOTE(tygaboy @ May 24 2018, 11:58 AM) 
Pretty! What's the ID and wall thickness of that tube? Any possibility they could be used as water lines...?
I forget the ID and will have to measure. From memory .875 ID..
That's the ticket. 
QUOTE(tygaboy @ May 24 2018, 03:57 PM)
Pretty! What's the ID and wall thickness of that tube? Any possibility I could run these as water lines...?
Damn that's smart...
QUOTE(mb911 @ May 24 2018, 01:55 PM)
QUOTE(tygaboy @ May 24 2018, 11:58 AM)
Pretty! What's the ID and wall thickness of that tube? Any possibility they could be used as water lines...?
I forget the ID and will have to measure. From memory .875 ID..
Ben - I don't want to hijack this thread so PM me, if you'd prefer. I've purchased 1.25 OD aluminum tube but think I could get by with 1" and all -16 fittings. That's what Tony is running and he's seeing no cooling issues. I wouldn't want to go smaller than that. But do let me know the ID?
Thanks!
Back before these were an option, I used -12 braided lines to feed my front cooler on my 2.7 conversion. It works fine on my street driven car, though I’d prefer going to -16 for a track car. I think Ben’s copy the factory design, so should work well.
QUOTE(GeorgeRud @ May 25 2018, 07:11 AM)
Back before these were an option, I used -12 braided lines to feed my front cooler on my 2.7 conversion. It works fine on my street driven car, though I’d prefer going to -16 for a track car. I think Ben’s copy the factory design, so should work well.
Yes for oil cooled but he is running am ls v8 engine..
Oh and the fittings are 30mm.. I just need to double check id..
They are 7/8" od. 3/4" id
Hope that helps.
Hope that helps.
QUOTE(mb911 @ May 25 2018, 02:16 PM)
They are 7/8" od. 3/4" id
Hope that helps.
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
QUOTE(SirAndy @ Jun 11 2018, 11:04 PM)
QUOTE(mb911 @ May 25 2018, 02:16 PM)
They are 7/8" od. 3/4" id
Hope that helps.
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
I lied, my current lines are -12 so they are in fact 3/4" ID.
Damn it, now you got me thinking ...
QUOTE(SirAndy @ Jun 11 2018, 10:11 PM)
QUOTE(SirAndy @ Jun 11 2018, 11:04 PM)
QUOTE(mb911 @ May 25 2018, 02:16 PM)
They are 7/8" od. 3/4" id
Hope that helps.
Hope that helps.
Bummer, i would gladly buy a set if they also came in 1" ID. 3/4" is too small for my 3.6L.
I lied, my current lines are -12 so they are in fact 3/4" ID.
Damn it, now you got me thinking ...
Lol.. They are a big line.. Let me know if I can help..
Ben very Nice 
I like how your thinking Chris
I like how your thinking Chris
Still have 20 sets none plated let me know if anyone needs them.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.