914sgofast2
Dec 26 2019, 01:16 PM
QUOTE(Mikey914 @ Nov 18 2019, 02:08 PM)
We are in the process of doing the A arm bushings in rubber
We can easily do these up in a polyurethane at the same time, just have to do enough to pay for the materials and set up would be looking at 25 sets to do the Poly
The GB would be for a set of 4 (enough for 1car)
For $28 in rubber
and $36 in poly
To get the pricing right we need 40 takers in rubber and 25 in Poly
We've been in testing on these for some time and had made a couple variations.
This is what they look like.
SO Who's in?
I will take a set of the rubber style bushings.
Mike D.
Porschef
Dec 31 2019, 10:19 AM
Well here it is the 31st and I haven’t placed my order as yet.
I’d like to replace all the suspension bushings on the car, if you’ve not gotten enough participation in the poly group then rubber is fine. Actually, I’d go with rubber.
I’m in the middle of an emergency hot water heater replacement, so pardon my not taking the time to figure this out
Thanks,
Joe
Mikey914
Dec 31 2019, 12:03 PM
No problem,
With everything going on I will send this next year (tomorrow).
I'll also extend the plug GB so those that were holding off can get at the same time.
Also, we are giving a special price for all the takers of the rear bushings on the A arm bushings so it will make it a really great deal.
TonyA
Dec 31 2019, 01:33 PM
Thanks looking forward to you PM on this. Hey do you have all the sway bar bushings I could not find on your website
Montreal914
Dec 31 2019, 06:19 PM
If there is still time for the rubber bushing group buy, I would be in!
Thank you and happy new year
Mikey914
Dec 31 2019, 06:47 PM
Yes, there is. I'll PM when I can get some time.
Thanks all and Happy New Year!
relentless
Dec 31 2019, 08:01 PM
I'm in for rubber if it's still ok. Happy New Year!
What's the special on the a-arms?
Mark Henry
Jan 1 2020, 11:56 AM
QUOTE(Mikey914 @ Dec 11 2019, 01:25 AM)
QUOTE(Mark Henry @ Dec 9 2019, 10:18 AM)
I see you haven't shipped my "Black Friday" order yet, can you hold it till these are ready?
I'll take a poly set, but if you don't have the numbers I'll take the OE set.
I did get ahold of Scott and we did get it held.
Mark
I guess you didn't hold it for the bushings, I just got a shipping notice.
So I guess I'm out till I actually need to do this job.
Literati914
Jan 5 2020, 06:40 PM
QUOTE(Literati914 @ Nov 20 2019, 09:01 PM)
1 Rubber Set plz.
QUOTE(Mikey914 @ Dec 22 2019, 10:15 AM)
QUOTE(Mikey914 @ Dec 31 2019, 06:47 PM)
Yes, there is. I'll PM when I can get some time.
Thanks all and Happy New Year!
I never got a PM on these, have they already been sent?
injunmort
Jan 5 2020, 07:52 PM
I didn't get a pm either. hey joe, maybe the focus of the first tech session?
Porschef
Jan 6 2020, 12:23 PM
QUOTE(injunmort @ Jan 5 2020, 08:52 PM)
I didn't get a pm either. hey joe, maybe the focus of the first tech session?
Great idea
I’d like a set in rubber if not too late. Thanks!
mbseto
Jan 6 2020, 01:04 PM
Also in for a set in rubber if it is not too late!
Mikey914
Jan 8 2020, 01:19 AM
Not too late on these. Just sent PMs to all.
I got side tracked with making a new option to the solid stainless pivot shafts.
For those looking for the stock ones they are here -
https://900designs-container.zoeysite.com/9...01-00-rear-axleFor some reason it comes up in the diagram section but will not be found in the search so I'll look into it.
Thanks to all that have made this possible. The GB will be open til end of the month.
Chris914n6
Jan 16 2020, 02:14 PM
I could use a set of rubber rear bushings. Sounds better than re-greasing the poly (pun intended)
flmont
Jan 16 2020, 11:03 PM
I would have a set also..
Mikey914
Jan 17 2020, 10:26 AM
Hey guys,
I’ll keep the GB open, may be a day or two before I can send the codes. Had
D to got to SAN to drive to a Yuma. The father-in-law isn’t doing so well so had to go with the wife to take care of family stuff.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.