I need the shorter lug bolts for a set of steel wheels. A partial set is ok and condition isn't important. I just need them for a roller so I can mount the wheels and move it around the garage. Cheaper the better. Please PM or mark@markepstein.net
Thanks

I will look this afternoon... get back to you in an hour or two

I have a coffee can full of them
was going to recycle them
I'll check... I don't think they went in the last load, but will check

yours for shipping
let me verify I have them
brant

I think I have some assorted short lugbolts for 914 also. I will check how many if Brant does not have complete sets I can send some and maybe free shipping.

Thanks guys

Ok, found them

so something I had not noticed before

13 are short
3 are less short

I haven't owned any bugs, beetles, or VW's other than the 914
so they should have all come from a 914

but still weird that 3 are a bit longer?

makes no sense.

anyone have an opinion or idea
your welcome to them all
I just want to make sure they will work for you

here are pics:

closer

Yea, I've seen different lengths. But These will work fine. I can get away with 3 bolts per wheel. The wheels just have to keep the car off the ground. It won't get driven.
I have alloy wheel bolts and they are too long. They bottom out before they get tight.
A good reminder to keep some short ones with your steel spare.

PM me a shipping address when you have time
I'll get them into a double bag/envelope
brant

@brant

Most of those are VW bolts. They are too short to work on 914 rear where they have to go thru the rotor then into the hub.


@mepstein

I have a set pulled which you can have for $10 to cover the shipping.
Bruce

Bruce

thank you.
weird that I have them
but you know your parts!

Mark,
I can still send you the 3 if you want them
or what ever your prefer

brant

Thanks Bruce.

Brant - no need but thank you.