1975, 76 2 piece muffler

Dave

Agreed. I took two nice sets to make one... did find NOS muffler but not heat exchangers

All NOS Porsche motorsports parts like this nos 935 flat fan kit.

I remember about a year after I bought my car, I went into the dealer to get a price on new muffler, just to keep in stock. Price at that time (1977) was $600 per half, not counting the connecting pipes!!!!! Needless to say I didn't buy. A mistake in light of the fact that they have never been available from Porsche or repopped since then.

Dave

@rgalla9146

http://www.914world.com/bbs2/index.php?showtopic=8825

GOOD GOD ALMIGHTY !!!

That's bringing a nuclear bomb to a gun fight.

Unbelievable. Great thread too.

Headlight squirter system, this probably the easy part to find.

Now THAT'S a WOW.

- Tony

Now that is nuts. I think we have a winner.

Had a friend looking for one of these…or any serviceable flat fun, for that matter.

Here ya go, then...(unless this is you! it's been up quite a while...and looks like it's sold)

https://www.thesamba.com/vw/classifieds/det....php?id=2195782

Thought of a few more:

The /6 'skinny' rear view mirror
Early small side mirror
Convex passenger mirror
The 'deep' early rear valence aka the snowplow

!

The hardest part when i restored Six's was the factory tailshift linkage rear plastic cover box for a Six linkage. . not the same as a 4 cylinder transmission.

Yeah, I know AA makes a repop but OE is impossible to find.

These used to be a lot easier to find with a little digging. Now, not so much.


Click to view attachment

same for J spec cars,
the 6 here that came in early 70s had those.
be pretty rare.
that would be ironic if one of the warts turned out to be monty python's quest?
personally l love the warts, even mec spec.

anyone know where to get the 2 little plastic tubes that hang out of the bottom of the spare wheel well. mine are still there but i had to apply a bit of urethane glue to ensure survival.
its a 911 part?

914Rubber has your drain tubes

Totally speechless!

Close the thread, we have a winner!

Correct interior light.

Just looking at these has may parts mfg senses tingling

I have the after market brake cover on my 914, waiting for 914 Rubber to make a repo...?...Mikey914
Click to view attachment

You would sell a bajillion of these things.....

OEM rear 914-6 calipers... have one set, need another

Pete, my buddy JimTorresRacing.com mfgs a complete 935/962 horizintal fan system...replication of the latest 935/78 style (serpentine belt w/tensioner), Real hard to tell the diff from the Stuttgart pieces. He mfgs. from aluminum, instead of the magnesium style from the Motorsports Dept.
In my prev post $44 (red horiz fan assy), not totally visible are the newly fabricated engine tins, that are placed at the engine oil cooler.
The 935 & 962s did not usually keep the OE cooler on the block.

That's why I posted a picture of a pair of 914-6 GT rear Calipers..
They were at Hershey 2 years ago..

Stoddard had em $99 a pair in 1978..

As noted, ZF limited slip differential, SD or 'spur diff'
The tag advises the use of special Shell lubricant.

An original KARO ski rack....

As fun as it to see the 935 flat fan stuff....this post I believe was meant to highlight Holy Grail parts for the 914. Correct me if I'm wrong.

914.501.003.11

Not wrong....4 cam Carrera fan housing plopped on a 356 engine ?

The 916 windshield with the integrated AM/FM antenna

Stoddard's just sent me an email advertisement.
They sell 914 Stainless Steel 2.0 Heat Exchangers @ $1,995.00 for the pair.
Tom

Yeah, try to find one 'o them !

You're in luck Rory, one just popped up for $21,500, you can buy it, we can start a club. That would be chummy!

https://porsche356registry.org/classifieds/34735

914-6 Grail

NOS Interior Light

Click to view attachment

NOS Narrow Mirror

Click to view attachment

NOS Left Door Pocket Edging

Click to view attachment

914 parts.
real 914 6 muffler hangar
It's the lower one in the picture and has larger slot for 10mm bolt vs. 8mm for 4cyl. 2.0
also cut 'square' compared to the 4cyl. angle. AND different shape (more pointed) pressed
reinforcement.

Like this? http://www.914world.com/bbs2/index.php?showtopic=349727

URO Parts has reproduced two Porsche 914 Muffler Brackets, which have the same dimensions and appearance as the factory brackets, including the correct end slots. See rgalla9146's post regarding bracket originality.

039 251 067
1973-75 914-4 2.0 with a duel inlet muffler and no cat.
Available here: https://sierramadrecollection.com/Muffler-b...-75-p55529.html

901 111 152 00
1970-1972 Porsche 914-6
Available here: https://sierramadrecollection.com/Muffler-b...-72-p55451.html

I surrender. How much? Looking for the price in your site part listing was futile. The bracket link is priceless too.

Marty already has the "Holy Grail"

Sorry about that, just added the link to 901 111 152 00 at Sierra Madre. We'll email them about adding 039 251 067 to their catalog, they must have missed it.

Ummm.....that was my post

I need another small spigot early aluminum engine...
(I consider this a 914 part because the factory raced this block at lemans and multiple original GT cars)

would love to find one sitting around for less than 10K
ha...

brant

Agreed. Luckily found a replacement after tossing a bent but probably repairable one in the trash can at Woody Creek back in the '80s.

Lots of rocks and boulders all around Woody Creek track, but I would have grabbed that valance if it was out there ! Holding off an RSR here with our teams' 2.5 hot rod
Click to view attachment

Yes the RSR did get by us, but made him work for it
now back to our scheduled topic !
Click to view attachment

Period license plate Dealer-frames are always cool
Click to view attachment