dear all,
out of necessity I had some needed parts done for the
KARO Ski Rack
for the 914 and sure for others racks possible, too.
All parts are done from stainless steel to prevent any rust issues, which made some of the racks unusable.
The one part is the
L profile
17,5x21,5x25x3
with two inner threads M4
for the front ski rack mounting points on the windscreen. This parts had been guillotine cutted, folded, sawed, milled flat, drilled, countersinked, and threads cutted.
price per piece: 24,20€
The other part is the
„clamp plate foot“, a
hexagonal bolts SW9 with connecting thread M 8x20 and countersunk spigot DM 4x4.5mm, GL 21,5mm
for fastening the part against the above described L profiles. These parts had been saw cut, milled and deburred, threads turned and countersunk spigots made. the „clamp plates“ had been sawed, milled and deburred, drilled, countersinked and assembled.
price per piece: 52,40€
shipping out of Bavaria.
feel free to get in contact with me 24/7/365
br
stay safe&healthy
haul