AVAILABLE
I made an improved design that is better looking, doesn't need any assembly and no painting. It's shipped ready to use and features a "from the shelf" claw that makes the design much better than my previous one.
It's still 3D printed with high strength Polyamid (SLS) and the finish is satin black. This printing technique makes very fine detail and smooth surface possible.
The mount will lock in the ashtray support and doesnt need any screw.
You can install and remove it without any tool and it is locked in place tightly. I tested it for one year and it works very well.
You can put the excess power cable in the tray if needed (see picture)
Will fit phones from 2.36 to 3.3 inches, (60 to 84mm)
Price included worldwide shipping is 39 Euros
This item is made for the community. A lot of effort was put in designing this mount and it is sold at production cost.
WANT ONE ?, CONTACT ME ON PM
AVAILABLE
Best regards
JOhannes (France)
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Full Version: Cell phone / Smartphone mount V2 - NOW AVAILABLE
Just ordered- thank you for making these and making them available!
Nice work - and a cool selection of t-shirts on your site, too!
QUOTE(johannes @ Jul 18 2022, 09:38 AM) 
Hi
A few years ago I made a small run of phone mounts for the 914.
This year I made an improved design that is better looking, doesn't need any assembly and no painting. It's shipped ready to use and features a "from the shelf" claw that makes the design much better than my previous one.
It's still 3D printed with high strength Polyamid (SLS) and the finish is satin black. This printing technique makes very fine detail and smooth surface possible.
The mount will lock in the ashtray support and doesnt need any screw.
You can install and remove it without any tool and it is locked in place tightly. I tested it for one year and it works very well.
You can put the excess power cable in the tray if needed (see picture)
Will fit phones from 2.36 to 3.3 inches, (60 to 84mm)
Price included worldwide shipping is 39 Euros
This item is made for the community. A lot of effort was put in designing this mount and it is sold at production cost.
A batch of 20 mounts is in production right now and will be available within 10 days.
<< CLICK HERE TO ORDER AND PAY WITH PAYPAL >>
Make sure your shipping address is filled in your Paypal account.
Hi,
Congrats on your new cell phone holder design......it looks GREAT!
I do want one so please HOLD one for me while I navigate the PayPal purchase (sometimes have technical difficulties).
My 914-6 is getting it's engine put back together and should be ready in the next few weeks (fingers crossed). This will be a great "welcome home" gift (plus some other things).
I am going to PM you with a question as well.
Please mark one sold for me.......
Cheers,
Margie
I'm in for one - paypal sent!
- Lance
- Lance
Paypal sent.
QUOTE(johannes @ Jul 18 2022, 09:38 AM)
Hi
A few years ago I made a small run of phone mounts for the 914.
This year I made an improved design that is better looking, doesn't need any assembly and no painting. It's shipped ready to use and features a "from the shelf" claw that makes the design much better than my previous one.
It's still 3D printed with high strength Polyamid (SLS) and the finish is satin black. This printing technique makes very fine detail and smooth surface possible.
The mount will lock in the ashtray support and doesnt need any screw.
You can install and remove it without any tool and it is locked in place tightly. I tested it for one year and it works very well.
You can put the excess power cable in the tray if needed (see picture)
Will fit phones from 2.36 to 3.3 inches, (60 to 84mm)
Price included worldwide shipping is 39 Euros
This item is made for the community. A lot of effort was put in designing this mount and it is sold at production cost.
A batch of 20 mounts is in production right now and will be available within 10 days.
<< CLICK HERE TO ORDER AND PAY WITH PAYPAL >>
Make sure your shipping address is filled in your Paypal account.
PayPal sent
Yippee! When do you expect it to ship? Can you ship to PO Box?
Cheers,
Margie
P.S. I also PM to you with a question.......
Man....that is sweet. But it looks like it might eliminate the "smoker's package".... where am I gonna put my butts?
QUOTE(rjames @ Jul 18 2022, 08:23 AM)
Just ordered- thank you for making these and making them available!
Thank you
Order received.
I will ship within within 10 days
QUOTE(NotLance @ Jul 18 2022, 10:09 AM)
I'm in for one - paypal sent!
- Lance
Thank you
Order received.
I will ship within within 10 days
6 mounts ordered so far. Thank you
Payment sent. Have one with a magnet but shakes loose on rough roads.
QUOTE(914SIXXation @ Jul 18 2022, 11:00 AM)
PayPal sent
Yippee! When do you expect it to ship? Can you ship to PO Box?
Cheers,
Margie
P.S. I also PM to you with a question.......
I will ship in ten days. Parts are at the printing facility.
QUOTE(Jim C @ Jul 18 2022, 01:08 PM)
Payment sent. Have one with a magnet but shakes loose on rough roads.
Paiement received.
I will ship in ten days. I will post on this thread when the parts are ready to ship.
I'm in....payment sent.
Excellent work Johannes. Great to see your post.
I still have the V1 and use it on every road trip. I do like your upgrade in V2. 
QUOTE(Craigers17 @ Jul 19 2022, 03:24 AM)
I'm in....payment sent.
Thank you. Paiement received. I will ship in ten days.
QUOTE(JeffBowlsby @ Jul 19 2022, 04:56 AM)
Excellent work Johannes. Great to see your post.
Hi Jeff. Thank you for your message. BTW, the international meeting will take place in France in 2023. If you happen to travel to Europe, you are welcome to join.
QUOTE(76-914 @ Jul 19 2022, 06:13 AM)
I still have the V1 and use it on every road trip. I do like your upgrade in V2.
Thank you. Much better design and easier to assemble.
Ordered, excellent looking product! Need one for the 356 now :-)
Ordered one. Looking forward to it.
Zach
Zach
What size is the ball? We have all our vehicles setup with magnets. I wonder if it'll clamp on to your base. 
I've been meaning to buy one of these from you for a while now. Just sent you payment, Johannes. Thanks!
QUOTE(narino @ Jul 19 2022, 11:43 PM)
What size is the ball? We have all our vehicles setup with magnets. I wonder if it'll clamp on to your base.
Ball is 17.4mm in diameter.
QUOTE(jhynesrockmtn @ Jul 19 2022, 12:21 PM)
Ordered, excellent looking product! Need one for the 356 now :-)
Thank you.
I will ship in 10 days.
QUOTE(VaccaRabite @ Jul 19 2022, 06:07 PM)
Ordered one. Looking forward to it.
Zach
Thank you Zach.
I will ship in 10 days.
QUOTE(BeatNavy @ Jul 20 2022, 04:18 AM)
I've been meaning to buy one of these from you for a while now. Just sent you payment, Johannes. Thanks!
Thank you Rob.
I will ship in 10 days.
16 ordered so far.
4 left
4 left
Ok; I’ll order one, also. Will PP to you later this am.
Count me in. Thanks for doing these.
Ordered one. Paypal sent.
Thanks for making these.
Thanks for making these.
ill take the last one if still available?
paypal sent
Love it. Payment sent. Cheers! PM sent to match my 914 World info with my PayPal info.
------- SOLD OUT ----------
Thank you for your orders. The batch is sold out.
All your orders will be shipped within 10 days.
I will run a new batch in a few month if there is enough demand.
------- SOLD OUT ----------
Thank you for your orders. The batch is sold out.
All your orders will be shipped within 10 days.
I will run a new batch in a few month if there is enough demand.
------- SOLD OUT ----------
QUOTE(johannes @ Aug 1 2022, 02:41 AM)
The phone mounts are now ready to ship
Message to LANCE SAVATGY and GEORGE BELZER:
You didn't provide any shipping address, please contact me by PM as soon as possible
Click to view attachment
I didn't see this until today. I'm in for the next batch!
I didn't see this until today as well. I'm in for two on the next round, please.
Count me in also on the next run…. Thanks
Count me in also on the next run…. Thanks
Johannes,
Count me on the next run too.
Thanks!
Count me on the next run too.
Thanks!
Would like to get in on the next batch.
Let me know when the next batch is ready.
I would like one
Any update on shipping?
QUOTE(Van914 @ Aug 3 2022, 04:11 AM)
Any update on shipping?
Does this answer the question ?... Yes its ready to ship, still custom paperwork to do.
Click to view attachment
All mounts have been shipped today.
As there is still some demand I have launched a new batch.
I will open orders in a few weeks as some parts take time to manufacture.
....
As there is still some demand I have launched a new batch.
I will open orders in a few weeks as some parts take time to manufacture.
....
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.