good sources for 4 bolt spacers.
1/4- 3/4 inches in width

need to fill out my pulled-rolled fenders just a bit more

also need source for longer lug bolts

Thanks

a guy on ebay will make you hubcentric spacers OR adapters....

not cheap

I got mine from CB Performance, formally Clyde's Buggies.

If those don't pan out, our 5mm spacers are drilled for 4 or 5 lug.

$59.00 a pair (see them in the V-Caliper thread)

I have 2 1/2" spacers ready to go if that'll work for you..you can test fit if you want....

Thanks for the offer Mike....those are just a wee bit too wide.

Actually my perfect size would probably be about 1/2 inch but 3/4 would probably work.

I'll keep yours in mind Eric.

Not in any hurry, just started my search....

does anyone know the name of the guy on ebay that makes the custom ones?

QUOTE (Dan (Almaden Valley) @ Apr 10 2006, 10:17 AM)

Thanks for the offer Mike....those are just a wee bit too wide. Actually my perfect size would probably be about 1/2 inch but 3/4 would probably work. I'll keep yours in mind Eric. Not in any hurry, just started my search.... does anyone know the name of the guy on ebay that makes the custom ones?

what are you putting in you morning coffee Dan??

Those spacer in the picture is .500" or 1/2" or 12.7mm which is your minimum requested size

Let me rephrase it: I have 2 spacers, they are 1/2" thick

Find some old junk rear rotors and take them to a machine shop. Have them machine the hats off and leave just the mounting face. Voila' instant spacer. I think they are .500. I used them to push my rear wheels out to fill out the flares on my car.

Mike,
Ah....now I see. I guess I was reading your post a little fast .......

and I don't drink coffee, really.

O.J. or milk....

what lenght studs are you using with those?

Here ya go Dan:

http://cgi.ebay.com/ebaymotors/Porsche-Whe...QrdZ1QQtcZphoto

QUOTE (STL914 @ Apr 10 2006, 10:32 AM)

Here ya go Dan: http://cgi.ebay.com/ebaymotors/Porsche-Whe...QrdZ1QQtcZphoto

did you even look at the price of those??

besides, common practice is nothing thinner than 1" for spacers that use secondary studs for mounting.

//////////////////////////////////////////////////////////////////////////

QUOTE

and I don't drink coffee, really.

no coffee?, oh no, couldn't do it.....

I cannot remember, I'll measure them for you...those are the BBS Racing screw-in studs

I just ordered a set of longer lug bolt from here

I'll let you know what I think when I get them. I had a set of spacers made for my fronts at a machine shop. I'll post pictures when I get home.