Qarl
Nov 20 2003, 01:00 PM
Anyone running 9x16 (930 Fuchs) rears with flares?
Did you have to install a spacer on the rear hub? If so, why?
Thanks.
SirAndy
Nov 20 2003, 01:12 PM
i sure would like to see that too. still thinking about that combo.
9 x 15 (or 16 or 17) with 285/45
Andy
Evill Ed
Nov 20 2003, 01:45 PM
I have Steel GT flares on my 914. My street wheels are 15 by 7 & 8 Fuchs with 225/50/15 at all 4 corners. I run 1-in spacers up front and 1/4-in on the rear.
My track wheels (Borbet) are 16 by 8 & 9 with 225/50/16 front and 245/45/16 rear. I keep the 1-in spacers up front and use no spacers in the rear. I had to trim the inner lip of the rear flares for adequate clearance. But they fit fine.
Ed
SirAndy
Nov 20 2003, 01:53 PM
QUOTE(Evill Ed @ Nov 20 2003, 11:45 AM)
My track wheels (Borbet) are 16 by 8 & 9 with 225/50/16 front and 245/45/16 rear. I keep the 1-in spacers up front and use no spacers in the rear. I had to trim the inner lip of the rear flares for adequate clearance. But they fit fine.
now show us those wheels! with the car attached to them ...
Andy
Evill Ed
Nov 20 2003, 01:56 PM
Yeah , yeah yeah.... You gotta wait until I feel like throwing them back on again, it's cold here in NJ, there is no incentive.LOL
I'll check to see if I have a pic, if not I'll take one this weekend.
It looks really cool from the back with these tires on.
Ed
J P Stein
Nov 20 2003, 01:59 PM
Ya gotta watch this EvilEd guy.
He "claims" to have turboed
a T-4. Even bogused up a bunch of pics of the car and they put it in Excellence......A hell of a PhotoShop job, I figure.
Evill Ed
Nov 20 2003, 02:04 PM
QUOTE(J P Stein @ Nov 20 2003, 11:59 AM)
Ya gotta watch this EvilEd guy.
He "claims" to have turboed
a T-4. Even bogused up a bunch of pics of the car and they put it in Excellence......A hell of a PhotoShop job, I figure.
Shhhhhhhhhh... JP, that's suppossed to be a secret.
Besides, I'm gonna use PhotoShop to actualy "fit" those 9-in wheels on the 914.
Ed
Joe Bob
Nov 20 2003, 02:05 PM
I ran 245s on my 16x8s and used a one inch spacer with standard 914/6 flares.
Qarl
Nov 20 2003, 02:09 PM
Lots of responses, thanks... but none with my specific combo question answered... keep trying.
BIGKAT_83
Nov 20 2003, 02:15 PM
QUOTE(kellzey @ Nov 20 2003, 12:09 PM)
Lots of responses, thanks... but none with my specific combo question answered... keep trying.
What is the offset for a 9/16 Fuchs ?
Qarl
Nov 20 2003, 02:21 PM
23.3 mm offset
BIGKAT_83
Nov 20 2003, 02:44 PM
I'm using a 9.5/17 wheel with a 20.5mm offset and running a 255/40/17 tire.this would be about .30 inches taller than the 245/45/16 . The inside rear needs a 1" spacer. I've got less than a 1/2 inch clearance on both the inside and outside with these with the 9" flair.
Bob................The guy that sent you the gas filler neck and cap
Qarl
Nov 20 2003, 02:48 PM
Ahh... thanks Bob (the gas filler cap guy!)
Brad Roberts
Nov 20 2003, 02:51 PM
Hey..somebody dug up EvilEd !!
What are you working on now Ed ?? Anything cool ??
b
TimT
Nov 20 2003, 03:04 PM
Karl, I have run 9X16 Fuchs with 245's, currently I have 1/2 in spacers on the car. If I trim the flares a bit I could get a 1" spacer in and get the wheels out further.
Without the spacers the wheels get lost in the wheelwells.
siverson
Nov 20 2003, 03:29 PM
Yup - that's exactly what I'm running. Fuchs 16x9, steel GT flares, .5" spacer.
The spacer just clears my rear brakes (C2T), and the flares were welded up to make this fit right. You really need to get everything fit (brakes/wheels/tires) then weld up the flare where you want them. My fender had to be pulled about 3/4" out for this combo to work, then the flare was welded on.
-Steve
siverson
Nov 20 2003, 03:30 PM
No good pictures right now other than this. (before engine installed)
Evill Ed
Nov 20 2003, 03:32 PM
QUOTE(Brad Roberts @ Nov 20 2003, 12:51 PM)
Hey..somebody dug up EvilEd !!
What are you working on now Ed ?? Anything cool ??
b
Hey Brad, Nothing new with the 914, but I did build an old school style chopper this year, I think it's pretty cool.
You can check it out at
http://community.webshots.com/user/evill914if your into bikes.
Plannin' some upgrade for the 914 this winter, I'll be here askin' lots of questions.
regards,
Ed
Brad Roberts
Nov 20 2003, 03:34 PM
Steve,
That building looks like "Beach Boys Racing" Bob Farmer's place in Venice next to Otto's.
Cool Ed.. it turned out slick.
B
siverson
Nov 20 2003, 05:27 PM
Nope, it's a shop here in downtown San Diego. I know what your talking about though. That photo was actually taken inside, it's just a very large warehouse.
-Steve
redshift
Nov 20 2003, 05:33 PM
QUOTE(Evill Ed @ Nov 20 2003, 05:32 PM)
Hey Brad, Nothing new with the 914, but I did build an old school style chopper this year, I think it's pretty cool.
Rockin' Ed! The chopper looks great!
I want to do an ME (Maltese Enhanced) interior in my black car.
M
Brad Roberts
Nov 20 2003, 05:38 PM
Steve,
Do you have any side shots of the car with the wheels on it ?
B
d914
Nov 21 2003, 12:54 PM
16x9 bbs et15 fits with no spacers with fiberglass flares
fiid
Nov 21 2003, 01:10 PM
Does that mean that these could fit??
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=244334047117x9s for the read and 17x7.5s on the front?
Would that be too much rubber? Is there such a thing??
I would probably go for like 45 series tires or something.
Fiid.
d914
Nov 21 2003, 01:24 PM
These were 17x8.5 17x7 with 32mm spacers
Brad Roberts
Nov 21 2003, 02:15 PM
Greg,
That color is kick ass. Any more pics of that car (or is it a fulll blown rac car now) ??LOL
B
d914
Nov 21 2003, 03:55 PM
nope, full boat race...
d914
Nov 21 2003, 03:55 PM
bbbb
boxstr
Nov 21 2003, 04:26 PM
Greg Looks like the car from Rotue 33 in Moiser Oregon.
CCLINCAMP914
d914
Nov 21 2003, 04:34 PM
I beleive it is, bought it from steve demost somthing or another up there. originally built by john forbes from del ray. yellow to black to this blue.
smrz914
Nov 21 2003, 06:47 PM
993 wheel with front/rear 7/9 225/255
dsmeyer
Nov 21 2003, 06:49 PM
Sure, 9x16 245/45 with a 1" spacer, Stock...
dgw
Nov 22 2003, 12:13 AM
QUOTE(kellzey @ Nov 20 2003, 11:00 AM)
Anyone running 9x16 (930 Fuchs) rears with flares?
Did you have to install a spacer on the rear hub? If so, why?
Thanks.
9x16, no spacers.
This pic was taken by DD. (damp dave)
smrz914
Nov 22 2003, 05:10 AM
I forgot to say that I have 1.5" spacers all the way around b/c the backspacing on the wheel is to big or small, depending on how you look at it.
Steve
Nov 22 2003, 02:01 PM
I'm running 7x16 993 rims with 205-50-16" up front with 1" spacers.
In the rear I'm running riveted on GT fiberglass flairs with 9x16" 993 rims with 245-45-16" tires and 2 1/4" spacers.
Steve
Mueller
Nov 22 2003, 02:18 PM
Dennis,
Are you running 16x9's on all 4 corners?????
your car looks great !!!!
dgw
Nov 23 2003, 09:00 PM
QUOTE(Mueller @ Nov 22 2003, 12:18 PM)
Dennis,
Are you running 16x9's on all 4 corners?????
your car looks great !!!!
Thanks!
No, the fronts are 8x16. I forgot to add yesterday that the flares are fiberglass.
Qarl
Nov 23 2003, 11:31 PM
Thangs dgw
redshift
Nov 24 2003, 05:29 AM
That car looks fantastic in red!
M
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.