As the volume of parts has grown I have had to centralize my operations onto my website to keep everything straight. It was a nice surprise for a member that wanted a bumper top and found out they weren't $375 any more.

You can find my parts and current pricing listed here-

http://shop.914rubber.com/

I need a Front main trunk seal 914-511-901-10 $60.00, but I don't see it on your website. Am I just blind?

Mike

They're not on the website for 2 reasons. First, the program I have for the webite only allows for 20 items for the shopping cart and I need to re-do the website, second the item requires alot of labor, I'm breaking out the gig to do up another 10 this weekend, I let them cure for a a day or two before I pack up to ship, so my quantity in stock is 0 and I have a back order for 2 right now. Good news is I do have a seal for the bulkhead and I can do a package for both for $75 if you want. I'll revise the list to include. I can have a seal to ship out for you by next week if you want a set (figure Wednesday).

Thanks

Sounds good.... that will give me time to get the channel cleaned out and repainted.

Let me know.

Mike

I'm going to need the main front trunk seal also. Please put me down for one. Thanks

Just wanted to tell you the Targa seals were perfect thankyou very much Mikey.

Still waiting on my stuff. repair for front targa seal and both side window targa seals. Sent 80.00 awhile back. Your son called asking what I ordered and I replied. No hurry but it's been awhile.
Charlie

Pm me your email and full name I'll track and find. He did some of my shipping when he was home over the holidays.

When the front trunk seals are ready, are you going to put them on the website? or just post through here?

Hope to have my channel cleaned and repainted this weekend.



Mike

As they are limited in quantity I will post in the clasified. I'll hold onto one for you until I have a chance to hear from you.
Thanks,
Mark

Just wanted to say thanks for the seals I ordered from you. Very high quality and a perfect fit.

Mikey, how would I go about ordering your set of engine by seals?

Seems like a good price, so if you could please give me the details for ordering from you, it'd be much appreciated!

Thanks.

Just let me know what you need and your email address and I can paypal you an invoice.

Thanks,
Mark

Mike,

Have you considered making flexible low front spoilers/air dams? The one on the market now is crazy expensive, and seems to be somehting that would be right up your alley.

Zach

Mark!

I just got the seals you sent me. Excelent quality!

I will be putting them in place soon.

Thank you very much!


Luis from Portugal!

Due to some of the tooling costs I had to put off extruding some products that were running low. These are on order now, but will be out of stock for a little while. Sorry guys, but more new stuff on the way.

Can't wait for the front rubber bumper tops, any idea when they'll be ready?

Still about 2-3 weeks out on the first article. Will be shipping within 3 weeks after pending approval. Seems like an eternity I know, but these things take some time.

Hey Mikey! ...always say that to my son too!

Are the dates above in red for 2009 or an older 2008 post???

I saw Front Bumper Top Seals on another Post that you're doing soon - is that the Top Pad / Enhancer Strip etc. along the top of the bumper to body??? I don't see it above - am I missing something? ...if so, how much? ..any pix of it?

If you do rear top pads that look better than the new one below &/or a better price than the "new" (NOS?) one I just got from PP for $375 + tax & S&H (lower one in att. pic.), then I'll send it back & get it from you! Frankly, PP's "new" one doesn't look much if any better than my dirty ole 36 year old OE one!

I need that Front Bumper Top Pad & L&R Horns/"Tits" for my 73 2L's repair - which of those are you doing, as they're all NLAs??

Also need both cowl seals each side, inner door seals both sides & outer lower window seals/scrapers - I see the door seals but not sure about the others on your list above - what about those & prices?

I may also need F&R Trunk Seal sets (including the F "blukhead" one - I think ) - if mine prove to be too far gone!?

Let me know - no huge rush, as I'm in the early parts gathering stages for my car's repair & resto to get back on the road again! I'll be doing the mechanicals first anyway, before I tackle the body stuff, so as not to have a new paint job screwed up by the mechanics crawling all over it!

Thanx!

COMPARISON OF MY SLIGHTLY DAMAGED 36 YEAR OLD OE REAR TOP PAD VS. PP's "NEW" ONE

Click to view attachment

Updated. 5/6/09

I just wanted to say I have purchased most of the items he makes and have recently started installing them. Great quality, fit and price Don't hesitate to buy these products.

Hey Mikey - can you post some pix of the outside & inside of that F bumper top strip that I highlighted in red above pleeeez!?

If you already did so at another link, then give that unless you want to post that here too.

...did you end up using SS on the internal stiffeners & studs/bases for that top strip???

Any ETA on your L&R front rubber "tits" (bumper guards)?
...& rear bumper rubber top strip?

Pleeeez post pix of those when ready too!
Thanx!!

I need these.
The engine lid seal worked out great.
Fender seals "T" type (2) 914-559-155-10 $7.00
Vertical targa seals (2)kit 914-531-143/4-10 $14.00
Outer door to window seals (2) 914-531-873/4-10 $13.00
Targa to window seals (2) 914-531-185-10 $38.00

Thanks
Phillip

I just received my engine decklid seal, and if I didn't know better I would swear it is an OEM part. Absolutely fantastic product!!! This will be the first place I look for ANY seal I need. Fantastic!

Thanks Jerry, more new stuff on the way!

Windshield exterior seal $20 replaces chrome
Rear Trunk Seal (front) 914-512-317-10 $14.00
Rear Trunk Seal main 914-512-317-10 $30.00
front blukhead seal only 914-511-902-10 $18
Fender seals "T" type (2) 914-559-155-10 $7.00
Outer door to window seals (2) 914-531-873/4-10 $13.00


Do you have the A-pillar seals that sit in the chrome and go against the triangle door windows?

Do you have the seals that go in the sail panel chrome trim and go against the window?

Sending you a PM with my email

Mike, I didn't see the link to your web site. can you post it?

914rubber.com

I do give my best pricing here, so drop me a PM or use the contact form on the site.

Thanks,

Mark

Just recieved the engine bay seal set and door handle seals. the quality is excellent. very impressed.
One question, the seals seem very long, are they meant to be cut to size/ perfect fit?

Yes I do provide them and most of my seals slightly longer than you will need them. I have recieved seals in the past and thought if these were just 1/8" longer they'ld fit perfectly. Well now they'll fit your car as well as you want them to.

Thanks again,
Mark

are all of your seals/products on your website?

I'm about to go ape-shit on seal buying, and get a ton at once.

Mikey914, can you see my post above? I sent you a PM with the same contents. I need all of those seals.

Thanks!

Sorry I thought I had responded. Been kind of crazy lately. I'll get you an invoice this afternoon wen I'm back in the office. Sorry for the delay.

No problem. I understand, just want to get them heh. Car will likely be in the garage a bit anyways.

Hi Mark,
I'm looking for the:
full front trunk seal w/ Bulkhead seal
rear main trunk seal
and I assume the fender seals "t" type are the cowl seals in front of the windshield? If so, I'll take a set of those as well.

Also, I just replied on your pre sale for the 3 part main targa seal.

Thanks!

pm sent

does your windshield to dash seal have the steel clamp on the inside so it just clamps around the stock channel or do i have to glue it in??
I am also interested in the one for the back window to engine lid if it has the clamp also....
thanks,
CHris

The rear has an aluminum clip so it will not rust. The front is made from Santoprene (better for the high temps in the sun) with a low clearance opening. I could have put the clip in, but it makes it harder to install with the windshield in. This seal is kept in place mainly by the close tollerence on the opening, but I cut mine about 1/8" longer than it needed to be and installed the corners first working my way to the center. This causes it to "over-center" and help hold it into place too. As it's not really a "seal" and a cosmetic piece it work out fine. Mine is also about 1/16" larger than stock making it hide the edge of the vinyl better.
Hope this helps.

HEY Mark
i am working on my shopping list for you.
can you update your list with everything you that you are now producing so i can do this once.
thanks
steve

Thanks Steve. I try to keep the list at the front page updated, but I know I need to add a few items right now. But the time you checkback I'll have it updated.

Thanks

pm sent

Updated parts list and pricing 2/7/10

Mark,

My parts came in this afternoon. Look good. Thanks for the fast delivery. I will order more later.

Dave

No more targa repair seal? I just can't swing 200 for the new one.

I can do one for you depending on where my stock is as I use the to make the main seal as a whole. I can do one for you right now no problem as I've just done a run not tool ong ago.

pm sent

Mark, I need a few seals and PM sent.

I found a couple for you Marky...

Mark,
On a more serious note. I sent you a PM because I was concerned about what happened to a package I ordered from you. Tracking however indicates that you notified USPS that you would be shipping on the 11th of March, not that you sent it on the 11th. You didn't respond to my PM and I am assuming that something in my order is not yet available? If you can update me on what part is not currently available, I would be happy to pay separate shipping. Some of that order is desperately needed...
Rob