I started to Putting together my SIX |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
I started to Putting together my SIX |
Kerrys914 |
Apr 22 2005, 06:25 PM
Post
#1
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
Got me heads back from Jeff "Sixnotfour" Hines (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
They came out GREAT and I can now start putting back together my 2.2 (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) Attached image(s) |
Kerrys914 |
Apr 22 2005, 06:27 PM
Post
#2
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
Had a broken exhaust stud replaced.. That was the deciding factor for the topend rebuild. (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif)
Attached image(s) |
Trekkor |
Apr 22 2005, 06:32 PM
Post
#3
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif)
Now the fun begins, can't wait to see it in. KT |
Kerrys914 |
Apr 22 2005, 06:58 PM
Post
#4
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
This is the car I am putting the SIX in (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
I swapped out the Dials for Fuchs (IMG:http://www.914world.com/bbs2/html/emoticons/beer.gif) I have been polishing them when I need a break from the engine rebuild (IMG:http://www.914world.com/bbs2/html/emoticons/screwy.gif) |
Kerrys914 |
Apr 22 2005, 06:59 PM
Post
#5
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
Attached image(s) |
Thorshammer |
Apr 23 2005, 08:01 PM
Post
#6
|
Senior Member Group: Members Posts: 749 Joined: 11-November 03 Member No.: 1,335 |
Nice time sert install, flat, flush, must have been done on a bridgeport or mill. Good work. Make sure you use some anti/never seize on the exhaust threads. I use copper nuts, but have headers, They come form Wurth 12mm and flanged, they work perfect.
Erik |
Larry |
Apr 24 2005, 06:53 AM
Post
#7
|
Newbie Group: Members Posts: 36 Joined: 3-July 04 From: Pipersville, PA Member No.: 2,293 |
Kerry,
Looks great. If you need an extra set of hands send me an email. Larry |
Cap'n Krusty |
Apr 24 2005, 12:16 PM
Post
#8
|
||
Cap'n Krusty Group: Members Posts: 10,794 Joined: 24-June 04 From: Santa Maria, CA Member No.: 2,246 Region Association: Central California |
Those "copper" nuts are steel, plated with copper, and the copper on the threads wears off when you install them. The Cap'n |
||
retrotech |
Apr 24 2005, 12:51 PM
Post
#9
|
retrotech Group: Members Posts: 470 Joined: 2-November 03 From: Mosier, Oregon Member No.: 1,302 |
Are those side markers? Got a closser picture of them?
|
Kerrys914 |
Apr 24 2005, 05:30 PM
Post
#10
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
Getting there. Not bad for the Sunday after Hershey (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)
Heads and Cam towers are ON!! Attached image(s) |
TimT |
Apr 24 2005, 05:50 PM
Post
#11
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
need some 935 rocker seals? (IMG:http://www.914world.com/bbs2/html/emoticons/idea.gif)
|
J P Stein |
Apr 24 2005, 05:59 PM
Post
#12
|
||
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
Everybody needs 935 seals. (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) Now comes the fun part....valve train.... "assembly is the reverse". (IMG:http://www.914world.com/bbs2/html/emoticons/wacko.gif) I had 3 extra new rocker shafts standing by JIC.....used 2 of em. |
||
type47 |
Apr 24 2005, 07:30 PM
Post
#13
|
Viermeister Group: Members Posts: 4,254 Joined: 7-August 03 From: Vienna, VA Member No.: 994 Region Association: MidAtlantic Region |
(IMG:http://www.914world.com/bbs2/html/emoticons/smilie_pokal.gif) keep up the pix
|
TimT |
Apr 24 2005, 07:54 PM
Post
#14
|
||
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
hehe my way of saying I have a few sets of 935 seals... want some? |
||
Aaron Cox |
Apr 24 2005, 08:52 PM
Post
#15
|
Professional Lawn Dart Group: Retired Admin Posts: 24,541 Joined: 1-February 03 From: OC Member No.: 219 Region Association: Southern California |
How do these mystical 935 seals differ from 911 stuffs?
im a /4 guy i guess |
J P Stein |
Apr 24 2005, 09:05 PM
Post
#16
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
The stock 9eleben had no seals on the rocker shafts.
The 935s did. When rebuilding a 911 motor, it's a good idea to put these in. They will seal up irregularities in the bores that are in put there by ham fisted mechanics like me. |
TimT |
Apr 24 2005, 09:08 PM
Post
#17
|
retired Group: Members Posts: 4,033 Joined: 18-February 03 From: Wantagh, NY Member No.: 313 |
Aaron they arent really mystical at all, the 935 rocker seals are o-rings that fit in the grooves in the rocker shafts.. they are not your normal o-ring though.. the OD is cut flat.
They help those pesky rocker shaft leaks on /6 engines I have pics.. somewhere LOL |
J P Stein |
Apr 24 2005, 11:24 PM
Post
#18
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
The wrench that rebuilt my 2.7 (rebuilt 9 years previously & sat on a shelf) put case sealant in the rocker bores. Getting that shit out....not to mention the shafts, was a trial....there were (IMG:http://www.914world.com/bbs2/html/emoticons/smash.gif) involved. The bores were pretty well dinged up when I was done. I ended up "butterflying" the bores, used the 935 seals, and made damn sure the shafts were properly seated.. Hasn't leaked a drop of oil.....from there.
|
iamchappy |
Apr 25 2005, 06:15 AM
Post
#19
|
It all happens so fast! Group: Members Posts: 4,893 Joined: 5-November 03 From: minnetonka, mn Member No.: 1,315 Region Association: Upper MidWest |
JP, I am considering rebuilding my 3.0. Most people I talk to are trying to scare me away from the idea. I would like to do it as the experience gained by a successful rebuild would end my fears if I every had to dig into it again. Should I try it?
|
Kerrys914 |
Apr 25 2005, 06:23 AM
Post
#20
|
Dear, the parts I just sold paid for that part ;) Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16 |
935 seals (IMG:http://www.914world.com/bbs2/html/emoticons/unsure.gif) Sounds like a plan. What are the seal part numbers?
I'll need to take a look at the rocker shafts and see if the PO used them. It may be one of those "While I am there..." things and I'll put them on. I plan on putting the timing chain housings on and the cams in tonight, after work. Photos to follow |
Lo-Fi Version | Time is now: 31st October 2024 - 05:33 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |